Provertha 9 Way Right Angle Cable Mount D-sub Connector Plug

  • RS-stocknr. 729-6450
  • Fabrikantnummer 40-1391122
  • Fabrikant Provertha
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

Profibus D Sub M12 Plug&Play

These I-Net Profibus bus connectors have M12 Plug&Play connections. There are four types of body configuration of the M12 Plug&Play I-Net Profibus bus connectors: Standard, Compact, Axial and Special with Body Orientations of 90°, 90°, 180° and 35° respectively. The I-Net Profibus bus connectors are available in two versions, namely: Standard with one male 'D' port connector and PG with two, male and female, 'D' port connectors for monitoring, see table.

I-Net Profibus Bus Connectors - Provertha

The Provertha I-Net Profibus 'D' bus connectors range feature Plug&Play M12 connectors as well as field assembly internal and external cable clamping versions. These I-Net Profibus connectors provide function and security for upto 40 Profibus participants at speeds of 12 Mbits/s. Configured for Profibus DP these I-Net Profibus connectors prevent signal reflections and are designed to produce only minimum signal impact and modification during connection. These I-Net Profibus connectors are fitted with an On/Off switch visible from the front.

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Right Angle
Mounting Type Cable Mount
Termination Method Screw Terminal
Housing Material Zinc Alloy
Length 59.0mm
Width 45.0mm
Depth 16.8mm
Dimensions 59 x 45 x 16.8mm
Minimum Operating Temperature -20.0°C
Maximum Operating Temperature +70°C
8 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
19 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
42,79
(excl. BTW)
51,78
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
42,79 €
10 - 24
39,79 €
25 - 49
37,67 €
50 - 99
36,37 €
100 +
34,25 €
Related Products
"D" connectors with crimp snap-in contacts. Closed entry ...
Description:
"D" connectors with crimp snap-in contacts. Closed entry socket insulators correct misaligned pins during engagement.,Socket shells accept socket contacts and plug shells accept pin contacts. Suitable crimp tool stock no. 458-904 and extraction tool stock no. 469-500.
For suitable hole cutters, refer to 'D' connector ...
Description:
For suitable hole cutters, refer to 'D' connector cutters (e.g. stock no. 477-8690). Rear entry release crimp contactsPlugs/shells tinned plated for shielding continuityRatchet controlled tool available separately.
Tinned metal housing with laminated ribbing for the ...
Description:
Tinned metal housing with laminated ribbing for the shielding. Installation in KSG 183, 184 und 185 possibleIndividual contact assignment, thus also partial assignmentCompatible with all common makesCan also be applied to external tools.
HD-20 series standard connector range featuring Sub-D housings ...
Description:
HD-20 series standard connector range featuring Sub-D housings with a metal backshell for crimping contacts (stock numbers beginning 301-8357).Meets main market standards.