TE Connectivity, AMPLIMITE Blank Size 20 Socket Contacts

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

AMPLIMITE D-Sub Connector Latching Blocks, Locking Posts, Keying Plugs, Gasket and Bushings

Accessories for AMPLIMITE series HDE, HDF, HDP and HD series d-sub connectors including locking post assemblies, latching blocks, and spring latches.
Stock number 680-9235 is a Keying Plug for use with size 20 sockets
Stock number 450-9365 is a 4-40 threaded Locking Post assembly
Stock number 717-4656 is a front panel Latching Block with M3 threaded hole
Stock number 450-9371 is a rear panel Latching Block with 4-40 threaded hole
Stock number 717-4634 is a front panel Latching Block with slot recess and through hole
Stock number 680-9392 is a rear panel Latching Block with slot recess and through hole
Stock number 450-9321 is a 2 piece Spring Latch
Stock number 717-4644 is an EMI RF Gasket, shell size 1
Stock number 782-9940 is a 4-40 threaded locking post kit
Stock number 782-1191 is a Slide Latch Clip with a 4-40 thread size for unfiltered mating half
Stock number 795-2292 is a set of 2 aluminium Stand-off Bushings with a 4-40 thread size
Stock number 798-1482 is a kit of 2 Latching Blocks with a 3 mm (0.12 inch) diameter through hole
Stock number 798-1498 is a plain Flat Washer size #4 (.219 and .125 inch diameters by .032 inch thick), Steel - Zinc plated clear chromate coating.
Stock number 822-5027 is a cord guard for 9 way AMPLIMITE plug or receptacle housings

TE Connectivity AMPLIMITE D-Subminiature Connectors

Specificaties
Kenmerk Waarde
Accessory Type Blank
For Use With Size 20 Socket Contacts
Series AMPLIMITE
1240 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 10)
0,409
(excl. BTW)
0,495
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 240
0,409 €
4,09 €
250 - 740
0,374 €
3,74 €
750 - 1990
0,327 €
3,27 €
2000 - 3990
0,268 €
2,68 €
4000 +
0,246 €
2,46 €
*prijsindicatie
Verpakkingsopties
Related Products
From Phoenix Contact, a range of solder D-Sub ...
Description:
From Phoenix Contact, a range of solder D-Sub connectors. The female high density D-Sub connectors in this series have copper alloy contacts in a tin plated steel shell. The connectors have 3 mm mounting holes on each side of the ...
WR-DSUB series PCB, through hole mount D-sub pin ...
Description:
WR-DSUB series PCB, through hole mount D-sub pin header and socket connectors with 3mm diameter mounting holes. These d-sub PCB mount plug and socket connectors have a white UL94-V0 PBT insulator with a steel tin plated shell. The contacts for ...
AMPLIMITE right angle mounting PCB mount d-sub plug ...
Description:
AMPLIMITE right angle mounting PCB mount d-sub plug and socket connectors with a european standard footprint. These AMPLIMITE PCB d-sub connectors have a tin plated steel shell a black, glass filled polyester housing, solder terminations and are pre-loaded with gold ...
AMPLIMITE right angle mounting d-sub connectors with Eurostyle ...
Description:
AMPLIMITE right angle mounting d-sub connectors with Eurostyle footprint. These AMPLIMITE PCB d-sub connectors have a tin plated steel front shell and a grey thermoplastic PBTP housing pre-loaded with gold plated copper alloy contacts. Stock number 718-3701 is 3mm hole ...