TE Connectivity ADK Series Series Zinc D-sub Connector Backshell, 25 Way, Strain Relief

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DK
Productomschrijving

ADK Backshells

Nickel plated die-cast zinc ADK backshells come as a complete kit comprising Shells, jackscrews and cable grommets to suit 4, 5, 7 and 9mm cable diameters.
These backshells have self tapping T10 screws, a suitable driver would be 736-181

Specificaties
Kenmerk Waarde
Number of Contacts 25
D-Sub Shell Size B
Housing Material Zinc
Body Orientation Straight
Colour Silver
Strain Relief Yes
Series ADK Series
50 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
150 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
9,788
(excl. BTW)
11,843
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
9,788 €
48,94 €
25 - 95
8,682 €
43,41 €
100 - 245
7,558 €
37,79 €
250 - 495
6,902 €
34,51 €
500 +
6,45 €
32,25 €
*prijsindicatie
Related Products
Socket retainer clips for securing mating socket connectors ...
Description:
Socket retainer clips for securing mating socket connectors to the 2500 Series 2.54mm x 2.54mm low profile headers. These socket retainers are made from stainless steel with a grey polyurethane coating and fit a variety of connector sizes.Part numbers 3505-80XX ...
High quality diecast backshells with dual cable entryIdeal ...
Description:
High quality diecast backshells with dual cable entryIdeal for 'daisy-chaining' connection within -eg.- industrial BUS systems applicationsProvided with a blanking plate to maintain screening integrity at the end of a cable runAvailable in 9,15, 25, 37-wayFor cable diameters of 4.8 ...
These metal hoods provide a shielded connection with ...
Description:
These metal hoods provide a shielded connection with electrical continuity between the chassis earth and the cable braid.The locking screws are 4-40 thread.
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits ...
Description:
AMPLIMITE straight exit two-piece RFI/EMI shielded backshell kits or cable clamps with die cast or metal plated plastic shields for use with HDE Metal-Shell and HDP Metal-Shell (tin plated only) d-sub cable mount connectors. These AMPLIMITE straight exit two-piece RFI/EMI ...