LEM LTSR Series Closed Loop Current Sensor, 0 → ±48A

  • RS-stocknr. 499-5362
  • Fabrikantnummer LTSR 15-NP
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CH
Productomschrijving

LTSR Series

Closed Loop Hall Effect transducers for the accurate measurement of current. The ASIC based transducer offers a ref in/out pin allowing the user to trim out offsets.

AC/DC, and mixed current measurement
Closed Loop, high accuracy (better than 1%)
Unipolar 5V supply
Different measurement ratings by altering pin configuration
Compact format
Excellent precision and linearity
Low temperature drift
PCB mounting

Specificaties
Kenmerk Waarde
Sensor Technology Closed Loop
Nominal Current 0 → ±48A
Supply Voltage 5 V
Sensor Type Hall Effect
Mounting Type PCB Mount
Frequency Bandwidth DC 100 to 200 kHz
Accuracy ±0.2 %
Bore Size 3.2mm
Series LTSR
Minimum Operating Temperature -40°C
Maximum Operating Temperature +85°C
Depth 10mm
Height 24mm
Width 22.2mm
64 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
158 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
13,24
(excl. BTW)
16,02
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
13,24 €
5 - 9
12,82 €
10 +
12,41 €
Related Products
Compensated closed-loop Hall effect current transducers for the ...
Description:
Compensated closed-loop Hall effect current transducers for the measurement of continuous, alternating, pulsed and mixed currents. Excellent dynamic performanceGood linearity and low temperature driftGalvanic isolation between input and measuring circuitPCB mountingBody material plastic to UL 94-V0.
Linear current sensors from Honeywell incorporating LOHET II ...
Description:
Linear current sensors from Honeywell incorporating LOHET II Hall effect transducers. These devices have increased temperature stability and 10 times less temperature drift than the LOHET I types and produce a ratiometric output voltage that varies from 19% to 81% ...
Measurement of continuous, alternating, pulsed and mixed currentsGalvanically ...
Description:
Measurement of continuous, alternating, pulsed and mixed currentsGalvanically isolated between inputs and measuring circuitSelf extinguishing plastic housing UL 94–V0Operating temperature range -10 to +85°C.
Single-pole closed-loop current transducers based on the Hall ...
Description:
Single-pole closed-loop current transducers based on the Hall effect principleVoltage output3 different input ranges via selection pinsCompact format for mounting on p.c.b.Excellent precision and good linearityLow temperature driftBody material plastic to UL94-V0.