LEM ATO Series Current Transducer, 100A

  • RS-stocknr. 177-4929
  • Fabrikantnummer ATO-100-B333-D16
  • Fabrikant LEM
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

ATO series is a split core current transformer for the electronic measurement of AC waveform current with galvanic separation between the primary circuit (power) and the secondary circuit (measurement).ATO series is an ideal current transformer for new Smart-Grid applications.

Split-core current transformer
Accuracy class 1
Voltage output 333 mV at IPr
⌀ 16 mm sensing aperture
1 m output cable
Ambient temperature −10 °C … +55 °C
Very low cost solution
Slot for attaching the C.T. on the primary with plastic tie
DIN rail adapter (optional).
No interruption of electricity during installation on insulated conductors
Quick, non-intrusive and easy setup
Provide a calibrate output.

Specificaties
Kenmerk Waarde
Nominal Current 100A
Transformer Type Split Core
Mounting Type DIN Rail
Frequency Bandwidth 1.5 kHz
Bore Size 16mm
Series ATO
Minimum Operating Temperature -10°C
Maximum Operating Temperature +55°C
Depth 33.2mm
Height 56.1mm
Width 40.8mm
16 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
54,33
(excl. BTW)
65,74
(incl. BTW)
Aantal stuks
Per stuk
1 +
54,33 €
Related Products
Current sensors with rectangular split core..Measurement of direct, ...
Description:
Current sensors with rectangular split core..Measurement of direct, alternating and pulse current with galvanic insulation.Connection using Molex 5045-04/AG connector.Compact size.Hole diameter: 21 mm.
Small size Hall Effect sensor for fitting to ...
Description:
Small size Hall Effect sensor for fitting to printed circuits to measure currents up to 100 A RMS.Current measurements of up to 16 A; 25 A; 33 A; 50 A or 100 A RMS based on primary connections made on ...
Electronic measurement of voltage: DC, AC, pulsed..., with ...
Description:
Electronic measurement of voltage: DC, AC, pulsed..., with galvanic separation between the primary and the secondary circuit. Features:Bipolar and insulated measurement up to 1500 VVoltage outputPCB mount8 pins5 V unipolar power supply.Advantages:Low consumption and low lossesCompact designVery low sensitivity to ...
Measurement of dc currentsLarge apertureEasy panel mountingNo insertion ...
Description:
Measurement of dc currentsLarge apertureEasy panel mountingNo insertion lossesSupply voltage 20/50Vdc - 22/38VacAccuracy ±1%Size (HxWxD) 57.2 x 30 x 89.7mmOperating Temperature -20 → +50°CWeight 100g.