Honeywell CSN Series Closed Loop Current Sensor, -60 → +60 mA nominal current, -70 → +70A output current

  • RS-stocknr. 169-7653
  • Fabrikantnummer CSNA111
  • Fabrikant Honeywell
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Honeywell CSN Series Hall Effect Current Sensor

The Honeywell CNS series of closed loop Hall-effect current sensors utilise the null balance or zero magnetic flux feedback method to provide accurate and repeatable measurements. The devices produce an output current which can be converted to a voltage by using a suitable load resistor.

• Measures AC, DC and impulse currents
• Lowest cost/performance ratio
• Rapid response, no overshoot
• High overload capacity
• High level of electrical isolation between primary and secondary circuits
• Operating temperature range 0 to 70 °C
• Small size and weight

Specificaties
Kenmerk Waarde
Sensor Technology Closed Loop
Output Current Range -70 → +70A
Nominal Current -60 → +60 mA
Supply Voltage ±15 V
Mounting Type PCB Mount
Frequency Bandwidth DC to 150 kHz
Accuracy ±0.5 %
Minimum Operating Temperature 0°C
Series CSN
Maximum Operating Temperature +70°C
Depth 18mm
Height 25.7mm
Width 40.5mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/10/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Box of 30)
24,828
(excl. BTW)
30,042
(incl. BTW)
Aantal stuks
Per stuk
Per doos*
30 +
24,828 €
744,84 €
*prijsindicatie
Related Products
TLI4970 high-precision current sensors from Infineon are based ...
Description:
TLI4970 high-precision current sensors from Infineon are based on their Hall technology. They are straight-forward, fully digital solutions which do not require external calibration or extra parts to function. Their compact footprint is also made possible by a coreless technology. ...
Compensated closed-loop Hall effect current transducers for the ...
Description:
Compensated closed-loop Hall effect current transducers for the measurement of continuous, alternating, pulsed and mixed currents. Excellent dynamic performanceGood linearity and low temperature driftGalvanic isolation between input and measuring circuitPCB mountingBody material plastic to UL 94-V0.
Single-pole closed-loop current transducers based on the Hall ...
Description:
Single-pole closed-loop current transducers based on the Hall effect principleVoltage output3 different input ranges via selection pinsCompact format for mounting on p.c.b.Excellent precision and good linearityLow temperature driftBody material plastic to UL94-V0.
Measurement of dc currentsLarge apertureEasy panel mountingNo insertion ...
Description:
Measurement of dc currentsLarge apertureEasy panel mountingNo insertion lossesSupply voltage 20/50Vdc - 22/38VacAccuracy ±1%Size (HxWxD) 57.2 x 30 x 89.7mmOperating Temperature -20 → +50°CWeight 100g.