Microchip PAC1934T-I/J6CX, Current Sensor 16-Pin, WLCSP

  • RS-stocknr. 168-2683
  • Fabrikantnummer PAC1934T-I/J6CX
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

The PAC1934 is a four channel power/energy monitor with current sensor amplifier and bus voltage monitors that feed high resolution ADCs. Digital circuitry performs power calculations and energy accumulation. The PAC1934 enables energy monitoring with integration periods from 1 ms to up to 36 hours. Bus voltage, sense resistor voltage, and accumulated proportional power are stored in registers for retrieval by the system master or embedded controller.

High-Side Current Sensor (4 Channels)
100 mV full scale voltage sense range, 16-bit resolution
Bidirectional or unidirectional options
Wide Bus Voltage Measurement Range 0V to 32V, 16-Bit Resolution
1% Power Measurement Accuracy Over a Wide Dynamic Range
On-Chip Accumulation of 28-Bit Power Results for Energy Measurement
User programmable sampling rates of 8, 64, 256, 1024 samples per second
36 hours of power data accumulation at 8 samples per second
WLCSP package (2.225 x 2.17)

Specificaties
Kenmerk Waarde
Package Type WLCSP
Pin Count 16
Mounting Type Surface Mount
Dimensions 2.225 x 2.17 x 0.422mm
Maximum Input Voltage 32 V
Minimum Input Voltage 0 V
Product Height 0.422mm
Product Length 2.225mm
Product Width 2.17mm
Tijdelijk niet op voorraad – voor levertijd of een alternatief product neem contact op via Live Chat of zoek een vergelijkbaar product op de website.
Prijs Each (On a Reel of 5000)
1,052
(excl. BTW)
1,273
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
5000 +
1,052 €
5.260,00 €
*prijsindicatie
Related Products
The PAC1932/3/4 are two, three and four-channel power ...
Description:
The PAC1932/3/4 are two, three and four-channel power and energy monitoring devices. A high-voltage multiplexer sequentially connects the inputs to a bus voltage monitor and current sense amplifier that feed high-resolution ADCs. Digital circuitry performs power calculations and energy accumulation. ...
The Microchip MCP1804 is a Low Dropout (LDO) ...
Description:
The Microchip MCP1804 is a Low Dropout (LDO) Voltage Regulator that operates from an input of 2.0 V to 28 V while delivering up to 150 mA of current. The device offers a low quiescent current of 50 μA and ...
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending ...
Description:
Accurate position controlHigh efficiencyLow-Power consumptionApplications in automotive, vending machines, ATM machines, paper feed in printers, scanners, security cameras.
TBD62003A series and TBD62004A series are DMOS transistor ...
Description:
TBD62003A series and TBD62004A series are DMOS transistor array with 7 circuits. It has a clamp diode for switching inductive loads built-in in each output. Please be careful about thermal conditions during use. 7 circuits built-in High voltage : VOUT ...