Si8920BC-IP Silicon Labs, Current Shunt Monitor Single Differential 8-Pin DIP

  • RS-stocknr. 901-3976
  • Fabrikantnummer Si8920BC-IP
  • Fabrikant Silicon Labs
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

Si8920 Isolated Amplifier for Current Shunt Measurement

The Si8920 is a galvanically isolated analogue amplifier. Their low voltage and differential input is ideal for measuring voltage across a current shunt resistor or for any place where a sensor must be isolated from the control system.

Output is a differential analogue signal amplified by either 8.1x or 16.2x. The very low signal delay allows control systems to respond quickly to fault conditions or changes in load. Low offset and gain drift ensure that accuracy is maintained over the entire operating temperature range.

High common mode transient immunity means that the Si8920 will deliver accurate measurements even in the presence of high power switching like would be found in a motor drive system or inverter.

To help evaluate the Si8920 there is a dedicated development kit available - SI8920ISO-KIT (RS 9026806). It is populated with the Si8920BC-IP and enables quick connection to a shunt resistor.

The Si8920 is available in 4 variants:
Si8920AC-IP (RS 901-3967) with an input range of ±100 mV in a Gull-Wing DIP-8 package
Si8920BC-IP (RS 901-3976) with an input range of ±200 mV in a Gull-Wing DIP-8 package
Si8920AD-IS (RS 901-3979) with an input range of ±100 mV in a SOIC-16 package
Si8920BD-IS (RS 901-3973) with an input range of ±200 mV in a SOIC-16 package

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specificaties
Kenmerk Waarde
Power Supply Type Single
Typical Single Supply Voltage 3 → 5.5 V
Number of Channels per Chip 2
Output Type Differential
Maximum Supply Current 5.5 mA
Mounting Type Through Hole
Package Type DIP
Pin Count 8
Dimensions 9.9 x 6.6 x 3.44mm
Height 3.44mm
Length 9.9mm
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 3 V
Width 6.6mm
138 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 2)
2,425
(excl. BTW)
2,934
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
2 - 8
2,425 €
4,85 €
10 - 48
2,36 €
4,72 €
50 - 98
2,30 €
4,60 €
100 - 248
2,235 €
4,47 €
250 +
2,18 €
4,36 €
*prijsindicatie
Verpakkingsopties
Related Products
±4000 V HBM ESDHigh common-mode voltage range−2 V ...
Description:
±4000 V HBM ESDHigh common-mode voltage range−2 V to +65 V operating−5 V to +68 V survivalBuffered output voltage5 mA output drive capabilityWide operating temperature range:−40°C to +125°CRatiometric half-scale output offsetExcellent ac and dc performance1 μV/°C typical offset drift10 ppm/°C ...
Ideal for High-Voltage Current Monitoring ApplicationsWide 4.5V to ...
Description:
Ideal for High-Voltage Current Monitoring ApplicationsWide 4.5V to 76V Input Common-Mode RangeIndependent Operating Supply VoltageHigh Accuracy and Low Quiescent Current Support Precision Application Requirements±0.1% Full-Scale AccuracyLow 100μV Input Offset VoltageThree Gain Versions Available5V/V ...
Current Sensing Amplifiers have a voltage output that ...
Description:
Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.
Linear Technology’s family of high-side current sense amplifiers ...
Description:
Linear Technology’s family of high-side current sense amplifiers allow current measurements to be made via an external resistor in the presence of high common mode voltages. Both voltage and current output types are available, together with both single and dual ...