TSC103IPT STMicroelectronics, Current Sense Amplifier Dual, Single Buffered 8-Pin TSSOP

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MA
Productomschrijving

Current Sensing Amplifiers, STMicroelectronics

Accurate sensing of currents in a circuit is central to enhance application safety.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specificaties
Kenmerk Waarde
Power Supply Type Dual, Single
Typical Single Supply Voltage 2.9 → 70 V
Typical Dual Supply Voltage -2.1 → 65V
Minimum CMRR 90dB
Number of Channels per Chip 1
Output Type Buffered
Maximum Supply Current 480 μA
Mounting Type Surface Mount
Package Type TSSOP
Pin Count 8
Dimensions 4.5 x 3.1 x 1.05mm
Height 1.05mm
Length 4.5mm
Maximum Operating Supply Voltage 5.5 V
Minimum Operating Supply Voltage 2.7 V
Maximum Operating Temperature +125 °C
Width 3.1mm
Minimum Operating Temperature -40 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07/04/2021, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 4000)
0,691
(excl. BTW)
0,836
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
4000 +
0,691 €
2.764,00 €
*prijsindicatie
Related Products
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...
The range of isolation amplifier optocouplers from Avago ...
Description:
The range of isolation amplifier optocouplers from Avago Technologies is ideal for industrial environments where the optocoupler is used to insulate high voltages and isolate any unwanted signals. Sigma-delta modulator technology allows the current and voltage sensor families to provide ...
These miniature isolation amplifiers are using advanced Sigma-Delta ...
Description:
These miniature isolation amplifiers are using advanced Sigma-Delta Modulator technology for current sensing and voltage sensing in power converters. They provide accurate measurements of phase current and bus voltage. With built-in safety insulation and high Common Mode Rejection (CMR) performance, ...