MAX9611AUB+ Maxim Integrated, Current Sense Amplifier Single Rail to Rail 10-Pin μMAX

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Current Sensing Amplifiers, Maxim Integrated

Note

Please note that any defect or non – conformance of this product must be discovered and reported to RS within 20 days of purchase.

Current Sensing Amplifiers have a voltage output that is proportional to the volt drop across a very low value resistor, usually in a high-current power rail. Hence they measure the current flowing in that power rail.

Specificaties
Kenmerk Waarde
Power Supply Type Single
Typical Single Supply Voltage 2.7 → 5.5 V
Minimum CMRR 106dB
Number of Channels per Chip 1
Output Type Rail to Rail
Maximum Supply Current 2.6 mA
Mounting Type Surface Mount
Package Type μMAX
Pin Count 10
Dimensions 3.05 x 3.05 x 0.95mm
Height 0.95mm
Length 3.05mm
Maximum Operating Supply Voltage 6 V
Minimum Operating Supply Voltage -0.3 V
Minimum Operating Temperature -40 °C
Width 3.05mm
Maximum Operating Temperature +125 °C
50 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 50)
1,851
(excl. BTW)
2,24
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
50 +
1,851 €
92,55 €
*prijsindicatie
Related Products
Current and power measurement for real-time system protection, ...
Description:
Current and power measurement for real-time system protection, feedback control and high-accuracy system monitoring.
Linear Technology’s family of high-side current sense amplifiers ...
Description:
Linear Technology’s family of high-side current sense amplifiers allow current measurements to be made via an external resistor in the presence of high common mode voltages. Both voltage and current output types are available, together with both single and dual ...
The NCS199A1R is a voltage output current shunt ...
Description:
The NCS199A1R is a voltage output current shunt monitor (also called current sense amplifier) which can measure voltage across shunts at common-mode voltages from -0.3 to 26V, independent of supply voltage. The low offset of the zero-drift architecture enables current ...
Supports Use of Small Current-Sense Resistors to Improve ...
Description:
Supports Use of Small Current-Sense Resistors to Improve Power-Supply Conversion Efficiency and Measurement AccuracyInput Bias Current of 80nA (max)Very Low 2μV Input Offset Voltage (MAX44284F/H)Extremely Low 50nV/°C Input Offset Tempco Coefficient-0.1V to +36V Wide Input Common-Mode RangeLow 0.05% Gain ...