Facom Plier Crimping Tool for Insulated Terminals

  • RS-stocknr. 876-4878
  • Fabrikantnummer 449BPB
  • Fabrikant Facom
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: TW
Productomschrijving

Facom 449B series Crimping Pliers for Insulated Terminals

Introducing the professional crimping pliers from Facom that offer a robust and comfortable solution for work on insulated crimp connectors. Manufactured from ultra-durable materials, these crimpers, ensure the safety of use and high performance. Ergonomically shaped and cushioned handles offer maximum comfort even when in operation for a long period of time. Crimping tool, cutter, strippers are an essential tool that should be in every kit.

Features and Benefits:

• Crimping pre-insulated terminals: 1.5-2.5-6 mm².
• Crimping bare terminals: 1.5-2.5-6 mm².
• Stripping: 0.75 to 6 mm².
• Built-in wire-cutting function.
• Weight: 260 g.

Typical Applications:

• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQs:

What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp

When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and the terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage

Specificaties
Kenmerk Waarde
Crimp Tool Type Plier
Crimp Connector Type Insulated Terminals
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
50 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
35,99
(excl. BTW)
43,55
(incl. BTW)
Aantal stuks
Per stuk
1 +
35,99 €
Related Products
RJ45 low-profile shielded male plugs, with or without ...
Description:
RJ45 low-profile shielded male plugs, with or without sleeve.360° shielding ensures optimum protection against interference.Two acceptable cable diameters: 5.4 mm and 6mm.The crimp tools and the grips should be ordered separately.
Hirose crimp tools HT601/TM21P-88 is a hand tool ...
Description:
Hirose crimp tools HT601/TM21P-88 is a hand tool designed to use with TM21 and TM11 series modular plugs. Manufactured from high-quality materials guarantee a long life and increased durability. Designed with a professional use in mind it is a serious ...
CRIMPFOX RCI 6 hand crimp tool for crimping ...
Description:
CRIMPFOX RCI 6 hand crimp tool for crimping symmerical red, blue and yellow insulated wire terminals (cable cross section range of 0.75 to 6mm2 (AWG 20 to 10). This CRIMPFOX RCI 6 hand crimp tool has three marked die stations, ...
These RS PRO professional crimping, stripping and cutting ...
Description:
These RS PRO professional crimping, stripping and cutting hand tool for use with CAT5 wire for the crimping of RJ11 and RJ45 terminals. Designed with professionals in mind and manufactured from high-quality materials. Frame made from high-quality carbon steel guarantee ...