Hirose Hand Crimping Tool for RJ45 Modular Plug
- RS-stocknr.:
- 719-4966
- Fabrikantnummer:
- HT601_TM21P-88P
- Fabrikant:
- Hirose
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
- RS-stocknr.:
- 719-4966
- Fabrikantnummer:
- HT601_TM21P-88P
- Fabrikant:
- Hirose
Wetgeving en conformiteit
- Land van herkomst:
- JP
Productomschrijving
Hand termination tool
Hirose crimp tools HT601/TM21P-88 is a hand tool designed to use with TM21 and TM11 series modular plugs. Manufactured from high-quality materials guarantee a long life and increased durability. Designed with a professional use in mind it is a serious tool for most demanding customers. Comfortable handle allows for long-time and safe operation.
Features and Benefits:
• Manual Tool designed for use with modular plugs TM11/21/31
• Perfect for contact/conductor termination (For cable and shield crimping)
• Quick and easy IDC contact termination and clamping of the cable
• Stainless steel dies
• Ambidextrous pliers
• Compact size: 222mm X 62mm X 21.5mm (L x W x T)
• Weight: 1kg
Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies
FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Features and Benefits:
• Manual Tool designed for use with modular plugs TM11/21/31
• Perfect for contact/conductor termination (For cable and shield crimping)
• Quick and easy IDC contact termination and clamping of the cable
• Stainless steel dies
• Ambidextrous pliers
• Compact size: 222mm X 62mm X 21.5mm (L x W x T)
• Weight: 1kg
Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies
FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.
How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.
The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.
Specificaties
Kenmerk | Waarde |
|---|---|
| Operation | Hand |
| Overall Length | 222 mm |