Weidmuller, PZ6/5 Plier Crimping Tool for Bootlace Ferrule

  • RS-stocknr. 425-8821
  • Fabrikantnummer PZ 6/5 -9011460000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

PZ 6//5 Crimp Tool

Weidmuller PZ 6 Roto is a professional tool designed for most demanding customers. It has been designed with a quality and durability in mind from the best materials to ensure long life operation.
The PZ 6/5 Crimp Tool is suitable for crimping wire end ferrules with or without plastic collars and features a versatile five-profile crimping head.PZ 6/5 Crimping Tool also has a ratchet to ensure accurate and consistent crimping and a release option in case of incorrect operation.

Features and Benefits:
• Manual Tool designed for use with wires and cable ferrules over the complete cross-section range of 0.25 to 6.0 mm²
• Precise Ratchet mechanism guarantees perfect crimping every time
• Release option in the event of incorrect operation
• Compact size: only 200mm long
• Weight: 423g

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

General Support Tooling

Specificaties
Kenmerk Waarde
Series PZ6/5
Crimp Tool Type Plier
Crimp Connector Type Bootlace Ferrule
Overall Length 200 mm
39 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
199,44
(excl. BTW)
241,32
(incl. BTW)
Aantal stuks
Per stuk
1 +
199,44 €
Related Products
Brought to you by RS Pro, a reliable ...
Description:
Brought to you by RS Pro, a reliable crimping tool with a non-ratchet, cam action for crimping the centre contact and rear ferrule of the ’N’ crimp plug. A quality crimping tool is a huge requirement to ensure a perfect ...
Ferrules available in the French colour code range ...
Description:
Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped ...
Introducing the RS PRO Crimp Tool for insulated ...
Description:
Introducing the RS PRO Crimp Tool for insulated terminals. This high-quality tool has been designed with precision crimping dies that enable accurate and easy connector crimping with minimal user effort. The DuoTech soft-grip handles have been ergonomically designed with the ...
Tools type PZ03 and type KEBS0560 have a ...
Description:
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an ...