RS PRO Plier Crimping Tool for Terminal

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: SE
Productomschrijving

RS Pro Crimp Tool For 6.0 mm² to 0.75 mm² Insulated Terminals

The 533-279 is an “Original line” hand crimp tool for insulated terminals in the range from 6.0 mm² to 0.75 mm²/AWG 22 to AWG10. The tool is designed to provide consistent and reliable crimp connections on end splices/ferrules wires.

Also known as Red, Blue and Yellow terminals. See stock numbers 534-238, 534-597, 534-468 typically. Symmetrical oval crimps are produced for the insulation and conductor barrel, either right or left handed.

Features and Benefits

• Versatile and easy to use for right hand or left hand users
• Non-slip main handle and low friction moving handle ensue a comfortable hand grip
• Provides two-hand grip in the final phase of crimping, increasing comfort and productivity
• Full cycle crimp mechanism to ensure consistent, reliable crimp
• Ratchet release mechanism to clear mis-crimps and obstructions
• Precision eccentric adjustment for consistent performance and ability to calibrate
• Each tool has a unique serial number for traceability
• Durable: life span exceeds 50000 cycles
• High strength, through hardened alloy Swedish steel construction

How to maintain the product?

• To maintain a good function and long life: Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever tool is exposed to dirt or other contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly

*Use a light mineral-free oil

Typical applications

• Maintenance & repair

How to use?

Open the tool. Insert terminal and wire in die nest from front. Close tool until ratchet release. Attention: To release ratchet mechanism, push the trigger forward when holding handles.

Note

Risk of electric shock. Do not use this tool on live wire.

Specificaties
Kenmerk Waarde
Crimp Connector Type Terminal
Crimp Tool Type Plier
Overall Length 225 mm
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
391 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
82,20
(excl. BTW)
99,46
(incl. BTW)
Aantal stuks
Per stuk
1 +
82,20 €
Related Products
This selection of two RS Pro professional ratchet ...
Description:
This selection of two RS Pro professional ratchet action crimp tools has been designed with quality in mind and manufactured from the high-quality steel that guarantees durability and long life operation. Both Crimp Tools are suitable for terminating the BNC, ...
RS PRO 8-indent crimp tool designed around MIL-C-2250/2 ...
Description:
RS PRO 8-indent crimp tool designed around MIL-C-2250/2 (setting 3 upwards). Lightweight and easy to operate, the positioners set the crimp contact barrel at the correct height for crimping. This professional hand tool offers wire range size of 26 AWG ...
This RS PRO crimp tool has a locator ...
Description:
This RS PRO crimp tool has a locator on the tool positions contacts in the tool jaws to give an easy consistent crimp action. A contact extraction tool is available for servicing connectors during maintenance and modifications. The operating instructions ...
RS Pro professional universal crimp tool frame for ...
Description:
RS Pro professional universal crimp tool frame for use in combination with a die set to create high-quality crimp terminals. This hand tool is made from durable hard wearing steel with a black oxide finish. Suited for applications where environmental ...