Weidmuller, Stripax Plus Plier Crimping Tool for Bootlace Ferrule

  • RS-stocknr. 452-473
  • Fabrikantnummer 9021920000
  • Fabrikant Weidmuller
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: DE
Productomschrijving

Bootlace Ferrule Strips

Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped and terminated. The automatic ferrule feed action allows efficient cable preparation and considerable time saving. The tool (which must be ordered separately) is moulded in glass filled polyamide and is lightweight in use.

The multifunction Stripax® Plus tool (Stock no. 452-473)

Note

Tool Length 210mm, Weight 260g

Weidmuller Stripax Plus is a professional multi-function tool designed for most demanding customers. It has been designed with a quality and durability in mind from the best materials to ensure long life operation.
The Stripax Plus allows for cutting, stripping and crimping of wires and cable ferrules. It features an automatic feed function for efficient cable preparation for manual wiring applications and ferrule crimping.

Features and Benefits:
• An efficient and multifunctional tool allowing for cutting, stripping and crimping
• Versatile tool for efficient wires and cable ferrules preparation over the complete cross-section range of 0.5 to 2.5 mm²
• Easy ferrule handling, contained inside tool in strip form with automatic feed function
• Integrated ratchet mechanism guarantees precise crimping
• Release option in the event of incorrect operation
• Compact size: only 210mm long
• Weight: 260g

Typical Applications:
• Maintenance & repair
• Electrical Installations
• Cable assemblies

FAQ’s:
What is the difference between un-insulated and insulated crimp tools?
Un-insulated crimp tools are typically used for general applications, whereas the insulated crimp tools have been VDE tested up to 1000 V, designed for use where electrical current is present.

How do you maintain the product?
• Axles and other movable parts should be regularly lubricated.
• Lubrication* is recommended at least every 10,000 cycles whenever the tool is exposed to contaminants.
• Adjustment of the crimping die nests should also be checked. Readjustment of the pressure adjustment axle is necessary when the pre-load of the tool decreases significantly.

The Importance of a High-Quality Crimp
When a crimping tool is used on a terminal, two crimps take place at the same time. One is the electrical connection between the conductor and terminal. The other is the insulation crimp which provides strain relief against vibration and tension. It is important that the electrical connection is gas-tight without any voids between the wire strands and the terminal. If there any voids present, then corrosion can occur causing resistance and excessive heat which damages the electrical connection. Using a good quality crimping tool will ensure that a full, gas-tight crimp is produced preventing future deterioration of the electrical connection and insulation breakage.

Approvals

-

Specificaties
Kenmerk Waarde
Series Stripax Plus
Crimp Tool Type Plier
Crimp Connector Type Bootlace Ferrule
45 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
171,28
(excl. BTW)
207,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
171,28 €
Related Products
Brought to you by RS Pro, a reliable ...
Description:
Brought to you by RS Pro, a reliable crimping tool with a non-ratchet, cam action for crimping the centre contact and rear ferrule of the ’N’ crimp plug. A quality crimping tool is a huge requirement to ensure a perfect ...
The RS PRO Janus is an ergonomic crimping ...
Description:
The RS PRO Janus is an ergonomic crimping tool with self-adjusting dies for producing a trapezoid crimp profile on wire ferrules 0.14-10.0 mm²/AWG 26-8. This durable ratchet crimping tool allows cutting, stripping and crimping to be easily achieved with minimal ...
Tools type PZ03 and type KEBS0560 have a ...
Description:
Tools type PZ03 and type KEBS0560 have a front entry die system and makes for easier access in confined spaces. Tools type KEB4010 has a smaller frame and is suitable for one-handed use. All tools have ratchet action with an ...
C Frame hand operated crimp tools with a ...
Description:
C Frame hand operated crimp tools with a double action jaw closure designed for service and repair. These C Frame hand crimp tools feature a ratchet mechanism which stays locked until the handles of the tool are fully closed and ...