TE Connectivity DuraSeal Series , Blue Insulated Crimp Terminal, 1.5mm² to 2.5mm², 16AWG to 14AWG, 6.35 x 0.8mm

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Waterproof Duraseal terminals

Crimp terminals pre-installed in a heat shrinkable sleeve coated with a hot melt adhesive to make them waterproof.
The connection, insulation and waterproofing are carried out through shrinking after crimping.

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Series Duraseal
Insulation Insulated
Insulation Material Nylon
Minimum Wire Size mm² 1.5mm²
Maximum Wire Size mm² 2.5mm²
Minimum Wire Size AWG 16AWG
Maximum Wire Size AWG 14AWG
Tab Size 6.35 x 0.8mm
Colour Blue
Contact Plating Tin
Contact Material Brass
Overall Length 32mm
17 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Box of 25
40,93
(excl. BTW)
49,53
(incl. BTW)
Box(es)
Per doos
Per stuk*
1 +
40,93 €
1,637 €
*prijsindicatie
Related Products
PLASTI-GRIP blade wire crimp terminals made of high ...
Description:
PLASTI-GRIP blade wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP blade crimp terminals is serrated in order to provide maximum electrical ...
PIDG blade wire crimp terminals consisting of a ...
Description:
PIDG blade wire crimp terminals consisting of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a copper sleeve and the whole is encased in a nylon colour ...
A range of insulated crimp blade terminals suitable ...
Description:
A range of insulated crimp blade terminals suitable for a variety of wire size ranges.Insulated crimp blade terminals with part number prefix 'FVWS' have a butted seam and flared vinyl insulationInsulated crimp blade terminals with part number prefix 'FVDWS' have ...
FASTON 250 series quick connect crimp receptacle terminals ...
Description:
FASTON 250 series quick connect crimp receptacle terminals that offer speed of application and uniform reliability. Experience over widespread segments of industry has proved this crimp to be the most effective way of assuring stable electrical and mechanical performance. These ...