Molex Insulated Tin Plated Direct Solder Crimp Terminal, 0.5mm² to 0.8mm², 20AWG to 18AWG

  • RS-stocknr. 167-6482
  • Fabrikantnummer 172249-0200
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Molex SolderRight Right-Angle Direct Solder Crimp Terminals

SolderRight™ right-angle direct solder board-in crimp terminals provide an alternative to soldering bare wires onto PCB or using two piece connectors by enabling low profile right angle wire connections to be made direct to a PCB. These SolderRight™ direct-solder terminals have twin solder pins that provide stability for solder processing, allow redundant current paths and provide wire strain relief. Typical applications for these SolderRight™ direct-solder crimp terminals include those where there are tight packaging restraints such as vehicle electronics, laptop computers, handheld devices, power supplies, consumer appliances etc.

Specificaties
Kenmerk Waarde
Series Number 172249
Insulation Insulated
Minimum Wire Size mm² 0.5mm²
Maximum Wire Size mm² 0.8mm²
Overall Length 8.6mm
Minimum Wire Size AWG 20AWG
Maximum Wire Size AWG 18AWG
Contact Plating Tin
Contact Material Brass
2 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Reel of 7000
Was 1.055,07 €
921,71
(excl. BTW)
1.115,27
(incl. BTW)
Reel(s)
Per reel
Per stuk*
1 +
921,71 €
0,132 €
*prijsindicatie