TE Connectivity, AMPMODU Strain Relief Bracket 87921-1

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Accessories

A range of TE Connectivity accessories for the AMPMODU IV series connectors.

509-2076 Keying Plug with 0.76 mm [0.03 in.] long peg for use with Mod IV housings see 718-9359 typical
788-0946 Keying Plug with 1.78 mm [0.07 in.] long peg for use with Mod IV housings 0.645 in. high only
509-2717 Keying Plug, black Polyamid 6.6 Mod IV for use with housings see 509-2537 typical
668-9741 Keying Plug, red Polyamid 6.6 Mod IV for use with housings see 509-2537 typical
668-9744 Keying Plug, green Polyamid 6.6 Mod IV for use with Mod IV housings see 718-9359 typical
681-2644 Keying Plug, natural Nylon 6/6 for use with Mod IV receptacle assemblies see 719-4301 typical
668-9747 Retention Plug with strain relief, red Mod IV for use with housings see 509-2537 typical
509-2701 Retention Plug, black Mod IV for use with housings see 509-2537 typical
680-2436 Retention Plug, red Mod IV for use with housings see 509-2537 typical
718-8488 Shunt 2 way 2.54 mm pitch Black AmpModu for use on 0.64 mm [0.025 in.] square posts
782-5257 PRO-CRIMPER III with Die Assembly for wire size 26-22 AWG AMPMODU IV contacts
78-1021 Strain Relief / Pull Tab for use with AMPMODU 87631 Series housings with 10 to 18 ways
778-1024 Strain Relief / Pull Tab for use with AMPMODU 87631 Series housings with ≧20 ways
909-7624 Locking latch

2.54mm TE Connectivity AMPMODU Mod IV Range

Specificaties
Kenmerk Waarde
For Use With AMPMODU Mod IV Series
Series AMPMODU
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
For use with Molex 5320, 90635 Series. ...
Description:
For use with Molex 5320, 90635 Series.
A range of Cable clamps / Strain Relief ...
Description:
A range of Cable clamps / Strain Relief for Mate-N-Lok Connectors. Each article constitutes half of a cable clamp, it is thus necessary to order two of them to facilitate assembly for a complete clamp. The material for these MATE-N-LOK ...
Strain relief kits for use with Metrimate square ...
Description:
Strain relief kits for use with Metrimate square grid plug and receptacle connectors. These Metrimate strain relief kits are made from red 94V-0 rated thermoplastic and are supplied with cable gates in order to accommodate various cable diameters up to ...
Universal MATE-N-LOK plug or cap housing strain reliefs ...
Description:
Universal MATE-N-LOK plug or cap housing strain reliefs and cap housing adaptors. The cap housing adaptors secure the cap housing strain reliefs to the housings to prevent the strain relief halves from “drawing in” when the screws are being torqued ...