TE Connectivity, Junior Power Timer Male Crimp Terminal Contact 1-963860-1

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

TE Connectivity MCP 2.8 Standard Tab Timer Contacts

MCP 2.8 standard tab timer contacts with stainless steel symmetric cantilever springs and a mating interface area of 2.79 x 0.81mm. These MCP 2.8 standard tab timer contacts mate with the MCP 2.8 contact system but can also be used with the Junior Power Timer connector system. For suitable cavity plugs see stock number 680-6905.

TE Connectivity Multiple Contact Point System (MCP)

Specificaties
Kenmerk Waarde
Gender Male
For Use With Junior Power Timer Connector Housing
Series Junior Power Timer
Minimum Wire Size mm² 0.2mm²
Maximum Wire Size mm² 0.5mm²
Termination Method Crimp
Contact Plating Tin
Contact Material Bronze
Maximum Contact Resistance 2mΩ
Minimum Operating Temperature -40°C
Maximum Operating Temperature +130°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 27/04/2021, met een levertijd van 1 werkdag.
Prijs Each (In a Pack of 10)
0,305
(excl. BTW)
0,369
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 +
0,305 €
3,05 €
*prijsindicatie
Verpakkingsopties
Related Products
VAL-U-LOK crimp pin and socket terminals for use ...
Description:
VAL-U-LOK crimp pin and socket terminals for use in the VAL-U-LOK TPA range of plug and receptacle connector housings. These VAL-U-LOK connector contacts are made from brass with a pre-tin plating and accept a wire size range of 26-22 AWG.For ...
A range of CI2 pin contacts for use ...
Description:
A range of CI2 pin contacts for use with the Econoseal E Series automotive connectors. All connectors are designed to be used with thin walled non-irradiated PVC cablesThough designed initially for automotive applications, Econoseal III can be used in any ...
Based on DIN 72585, this range of sealed ...
Description:
Based on DIN 72585, this range of sealed connectors has been developed to meet the demand for superior performance. Single piece, formed constructionTin platedWire seals are crimped individually with the contact.
The Hermaphoroditic Blade and Receptacle Connector is an ...
Description:
The Hermaphoroditic Blade and Receptacle Connector is an SMT connector, intended for use with in-line board-to-board applications. Applications include: LED lighting controls, LED lighting strips, channel lettering. For suitable housings see, for example, stock no. 686-0877.