Molex, Mega-Fit Cover 200122-0112

  • RS-stocknr. 123-5195
  • Fabrikantnummer 200122-0112
  • Fabrikant Molex
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Molex Mega-Fit 5.7mm Receptacle Housing Backshells

Two-piece backshells for use with the 5.7mm Mega-Fit dual row receptacle housings to provide strain relief. These Mega-Fit receptacle backshells have a hermaphroditic dseign and are availble as standard 94V-0 versions (part numbers 200122-00xx) or with Glow Wire Compliance per IEC 60335-1 (Part numbers 200122-01xx). Two backshell halves are required for each connector.
Part numbers 200122-00xx are for use with the 171692 series Mega-Fit receptacle housings
Part numbers 200122-01xx are for use with the 170001 series Mega-Fit receptacle housings

Molex Mega-Fit 5.7 mm Pitch Series

The Mega-Fit Power Connector range from Molex is a high current density system having a tight pitch and row spacing with applications in virtually every industry at 23 A per circuit.

Specificaties
Kenmerk Waarde
For Use With 170001 Mega-Fit Receptacle Housing
Series Mega-Fit
Series Number 200122
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/12/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Pack of 4)
1,078
(excl. BTW)
1,304
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
4 - 8
1,078 €
4,312 €
12 - 24
0,95 €
3,80 €
28 - 96
0,903 €
3,612 €
100 - 248
0,823 €
3,292 €
252 +
0,783 €
3,132 €
*prijsindicatie
Related Products
Description:
A range of Cable clamps / Strain Relief for Mate-N-Lok Connectors. Each article constitutes half of a cable clamp, it is thus necessary to order two of them to facilitate assembly for a complete clamp. The material for these MATE-N-LOK ...
Universal MATE-N-LOK plug or cap housing strain reliefs ...
Description:
Universal MATE-N-LOK plug or cap housing strain reliefs and cap housing adaptors. The cap housing adaptors secure the cap housing strain reliefs to the housings to prevent the strain relief halves from “drawing in” when the screws are being torqued ...
Panel mount pin shrouds for use with single ...
Description:
Panel mount pin shrouds for use with single row 2.54mm AMPMODU MTE pin receptacle assemblies with guide ribs which are inserted into the shroud. These AMPMODU MTE panel mount pin shrouds are made from UL 94V-0 rated black thermoplastic and ...