TE Connectivity DuraSeal Butt Wire Splice Connector, Blue, Insulated, Tin Plated 16 → 14 AWG

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: MX
Productomschrijving

Splices

Red 0.25 - 1.6 mm²
Blue 1.0 - 2.6 mm²
Yellow 2.7 - 6.6 mm²

Approvals

UL

Approvals

UL

Duraseal Heatshrinkable

TE heat shrinkable pre-insulated nylon splices and crimp terminals provide reliable connections, especially where environmental sealing is important. Covering cable sizes from 0.5mm - 6.0mm², they are designed for use where water or condensation may be encountered, or where abrasion or mechanical abuse could be problematic. To complete a joint, the cable connector is crimped in the traditional manner, and the sleeving is then heated to shrink around the cable insulation. Special adhesive flows during the heating to seal the joint.

• The TE Duraseal kit is especially suited for use in automotive (approved by most car manufacturers) and marine builds, where environmental sealing is important
• Kits are also available comprising various heat-shrinkable pre-insulated nylon splices and terminals, covering ranges from 0.5mm² to 6.0mm².

Approvals

UL Listed

Specificaties
Kenmerk Waarde
Splice Type Butt
Wire Size 16 → 14 AWG
Overall Length 36mm
Diameter 4.6mm
Insulation Insulated
Colour Blue
Series DuraSeal
Shrouded Shrouded
Contact Material Copper
Contact Plating Tin
3900 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
46700 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 50)
0,458
(excl. BTW)
0,554
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
50 - 200
0,458 €
22,90 €
250 - 1200
0,389 €
19,45 €
1250 - 2450
0,344 €
17,20 €
2500 - 4950
0,298 €
14,90 €
5000 +
0,252 €
12,60 €
*prijsindicatie
Related Products
ELECTRO-TAP splices offer an economic method of joining ...
Description:
ELECTRO-TAP splices offer an economic method of joining branch or tap wire to solid or stranded for wire ranges 0.5mm - 6.0mm² using insulation displacement self-stripping contacts. These ELECTRO-TAP splice connectors have colour coded nylon housings which double lock when ...
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals ...
Description:
PIDG (Pre-Insulated Diamond Grip) wire crimp splice terminals designed for uniform reliability in the most difficult circuit environments. These PIDG wire splice terminals consist of a precision-formed high conductivity copper body and barrel. The wire barrel is surrounded with both ...
PLASTI-GRIP closed barrel butt splice wire crimp terminals ...
Description:
PLASTI-GRIP closed barrel butt splice wire crimp terminals made of high conductivity tin plated copper with an expanded high dielectric strength 94V-0 rated vinyl insulation sleeve. The inner barrel of these PLASTI-GRIP butt splice crimp connectors is serrated in order ...
PIDG wire caps for use with either stripped ...
Description:
PIDG wire caps for use with either stripped or unstripped wire ends. These PIDG wire caps consist of a precision-formed metal wire barrel containing serrations which provide maximum contact and tensile strength after crimping. This barrel is enclosed in a ...