JST FTR Series Insulated Crimp Bootlace Ferrule, 8mm Pin Length, 1.7mm Pin Diameter, 1.5mm² Wire Size, Black

  • RS-stocknr. 122-5196
  • Fabrikantnummer FTR1.5-8
  • Fabrikant JST
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

JST French Colour-Coded Insulated Bootlace Ferrule Crimp Terminals

A range of industrial standard French colour coded insulated bootlace ferrule crimp terminals. These insulated bootlace ferrule crimp terminals are made from oxygen free copper which is both robust and highly conductive with excellent mechanical and electrical characteristics. The terminals are then electroplated with tin and treated by a special process developed by JST. This method ensures that there is maximum adhesion of the electroplating, reduces electrical resistance and increases resistance to corrosion. The insulation of these bootlace crimp ferrules is made from polypropylene which has excellent flame resistance and insulation properties. These insulated bootlace crimp ferrules are available in various wire sizes.

JST Bootlace Ferrules

Specificaties
Kenmerk Waarde
Maximum Wire Size mm² 1.5mm²
Pin Diameter 1.7mm
Number of Entries 1
Insulation Material PP
Colour Black
Pin Length 8mm
Insulation Insulated
Maximum Wire Size AWG 16AWG
Overall Length 14mm
Series FTR
2600 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
68200 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Bag of 100)
0,058
(excl. BTW)
0,07
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
100 - 900
0,058 €
5,80 €
1000 - 2400
0,056 €
5,60 €
2500 - 4900
0,054 €
5,40 €
5000 - 9900
0,05 €
5,00 €
10000 +
0,049 €
4,90 €
*prijsindicatie
Related Products
Ferrules available in the French colour code range ...
Description:
Ferrules available in the French colour code range in sizes 0·5 to 2·5mm².,Each pack of ferrules contain 10 strips of 50, which can be rapidly terminated with a special tool, with automatic feed action enables cables to be cut, stripped ...
These insulated ends comprise a tinned copper tube ...
Description:
These insulated ends comprise a tinned copper tube and a coloured rilsan™ moulding.The universal tool can be used to crimp cable ends from 0.25 mm2 → 6 mm2.
Starfix® is a cable end design that offers ...
Description:
Starfix® is a cable end design that offers a time saving of up to 50% compared to a standard connector.Simple, reliable and economic, this system allows crimping and cabling to be carried out in the same place.
Stripax plus pliers allow you to cut, strip ...
Description:
Stripax plus pliers allow you to cut, strip wires between 0.5 and 2.5 mm2 and crimp wire-end ferrules with the same cross section.Wires can be cut and stripped without clutch crimping the wire-end ferrules. Crimping complies with EN standard 50027 ...