Schneider Electric 5 Digit, Mechanical, Digital Counter, 12 → 24 V ac/dc

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

XB5 series specific functions

Controllers, hour meters, buzzers and fuse-holders with plastic collar Ø 22 mm

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 24 V ac/dc
Count Mode Hours
Display Type Mechanical
Input Type Voltage
Connection Type Push On
Reset Method No Reset
Number of Digits 5
Mounting Type Panel Mount
Minimum Operating Temperature -25°C
Maximum Temperature +70°C
Maximum Operating Temperature +70°C
Weight 45g
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 26/11/2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
136,91
(excl. BTW)
165,66
(incl. BTW)
Aantal stuks
Per stuk
1 +
136,91 €
Related Products
The SLIK-N118 is a highly programmable, universal LED ...
Description:
The SLIK-N118 is a highly programmable, universal LED counter. Encased in a tight, IP67 wall-mounted housing, this counter is designed for use in hard environment conditions.The counter comes equipped with independent counting inputs that operate in various configurations (pulse or ...
6-digit electro-mechanical totalising counters.Counting speed for pulse / ...
Description:
6-digit electro-mechanical totalising counters.Counting speed for pulse / pause ratio = 1:- 20 pulses / sec. in Vdc minimum duration 25 ms / max. unlimited- 10 pulses / sec. in Vac minimum duration 50 ms/max. unlimited.Supplied with plug-in solder clips.Screw ...
Programmable with microprocessors, comprising a general totaliser, a ...
Description:
Programmable with microprocessors, comprising a general totaliser, a counter with 2 presets, single preset counter programmable as a tachometer, & an hour meterprogrammable scaling and reset modesLED DisplayProgrammable zero shift and permanent display of the programmed parameterOperating temperature 0 to ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...