Hengstler 6 Digit, LCD, Digital Counter, 5kHz, 12 → 24 V dc

  • RS-stocknr. 200-0967
  • Fabrikantnummer 0 732 000
  • Fabrikant Hengstler
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: DE
Productomschrijving

Position Indicator/Tachometer

Units display rate per minute of pulses received
Resettable
7mm digit height
0 to +50°C operating temperature

Specificaties
Kenmerk Waarde
Supply Voltage 12 → 24 V dc
Count Mode Hours
Display Type LCD
Input Type Voltage
Connection Type Screw
Reset Method Automatic, Manual
Number of Digits 6
Mounting Type Panel Mount
Digit Height 9 mm
Maximum Count Frequency 5kHz
Display Range -99999 → 999999
Series TICO 732
Measurement Range -99999 → 999999
Minimum Operating Temperature 0°C
Maximum Operating Temperature +50°C
3 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
127,66
(excl. BTW)
154,47
(incl. BTW)
Aantal stuks
Per stuk
1 +
127,66 €
Related Products
Sentron series electronic time counters are used for ...
Description:
Sentron series electronic time counters are used for accurately monitoring production and service times, which enables the exact planning and monitoring of production sequences. The accuracy of the counters also enables them to monitor maintenance cycles and warranty times.There are ...
8 digit LCD counter for applications without power ...
Description:
8 digit LCD counter for applications without power supply (battery powered)Very good readability due to leading zero blanking and 8mm digit heightSlow count input e.g. for mechanical contactsFast count input up to 30kHzEasy and safe connection due to screw terminalsSolution ...
Direct display of the total number of pulsesTransistor ...
Description:
Direct display of the total number of pulsesTransistor outputManual or electrical reset of the displayFast PNP or damped NPN, control via separate inputsMultifunctional reset key, lockable by a separate inputNo programming requiredCounting range: 0 ... 9999999, no decimal pointValues stored ...
Range of resettable counters with data retention rated ...
Description:
Range of resettable counters with data retention rated at greater then 10 years. Prescaler options and Multiplier scaling outputs for correctly displaying engineering units. Units have a maximum count frequency of either 30Hz or 5kHz depending on setting. Inputs are ...