Schneider Electric Tesys D LC1D 4 Pole Contactor, 4NO, 25 A, 24 V ac Coil

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Schneider Electric LC1D TeSys D Contactors

TeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.

Features and Benefits

• Built-in auxiliary contacts for added switching capability
• Screw connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applications

What does the utilisation category AC1 and AC3 mean for the TeSys contactors?

Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.
AC-1: This applies to all AC devices with a power factor of at least 0.95. Example of use: resistive load, heating, distribution.
AC-3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.

What accessories are available?

• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocks

Is the TeSys D range a double break pole type contactor?

Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.

Schneider Electric LC1DT25B7 Contactor

The Schneider Electric LC1DT25B7 model is a 4 pole contactor featuring a 24 V ac operating coil, with an AC-3 full load current rating of 25 A.

Specificaties
Kenmerk Waarde
Coil Voltage 24 V ac
Number of Poles 4
Contact Current Rating 25 A
Range TeSys D
Series LC1D
Normal State Configuration 4NO
Contact Voltage Rating 690 V ac
Number Of Auxiliary Contacts 2
Terminal Type Screw
Minimum Operating Temperature -5°C
Depth 90mm
Width 45mm
Length 85mm
Maximum Operating Temperature +60°C
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
30 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
46,51
(excl. BTW)
56,28
(incl. BTW)
Aantal stuks
Per stuk
1 +
46,51 €
Related Products
TeSys K Silent Miniature Contactors from Schneider Electric ...
Description:
TeSys K Silent Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The LP1K range are DC operated contactors recommended for use in areas sensitive to noise and high interference mains supplies. ...
These contactors, unlike relays, are specifically designed to ...
Description:
These contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, Schneider Electrics contactors can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts. These contractors ...
TeSys K Miniature Contactors from Schneider Electric combine ...
Description:
TeSys K Miniature Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The TeSys SK contactors offer quick simple setup while maintaining compliance with international standards. A special armature structure design allows all ...