Schneider Electric Overload Relay NO/NC, 5.5 → 8 A, 8 A

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: FR
Productomschrijving

Three-pole Thermal Overload Relays

Three-pole thermal overload relays designed to protect ac circuits against overloads, phase failure, long starting times and prolonged stalling of the motor.

Adjustable relay setting dial
Test button
Stop button
Manual/auto reset
Trip indicator
Sealable cover
1N/O & 1N/C auxiliary contacts
Direct mounting beneath three-pole contactors or independent mounting on DIN rail
Insulation voltage 600V, Withstand Voltage 6kV

Approvals

UL and CSA

Specificaties
Kenmerk Waarde
FLC Motor Rating 5.5 → 8 A
Contact Current Rating 8 A
Pole Configuration 3P
Range TeSys
Contact Voltage Rating 690 V ac
Mounting Style Direct Contactor
Series LRD1
Normal State Configuration NO/NC
Number Of Auxiliary Contacts 2
Terminal Type Screw
Reset Method Automatic, Manual
Length 123mm
Width 45mm
Depth 66mm
Maximum Operating Temperature +60°C
Operating Temperature Range -20 → +60 °C
Minimum Operating Temperature -20°C
5 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
56,50
(excl. BTW)
68,36
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
56,50 €
10 - 14
54,21 €
15 +
51,86 €
Related Products
Mechanical ResetVertical mouting106 x 45 x 58mm (H ...
Description:
Mechanical ResetVertical mouting106 x 45 x 58mm (H x W x D)Ingress protection to IP65Overload relays only for the discontinued 4kW (AC3) D.O.L starter.
Phase failure sensitiveTest ButtonTrip-Fault IndicationManual or automatic reset ...
Description:
Phase failure sensitiveTest ButtonTrip-Fault IndicationManual or automatic reset facilityTemp. compensated trip -20 to +55°C.
Can be used with all motors equipped with ...
Description:
Can be used with all motors equipped with PTC thermistor probes. It monitors windings temperature and ensures that the rated operating value is not exceeded, therefore guarding against faults which are often the cause of premature ageing. They can also ...
Suitable for remote machine protection requirements where machinery ...
Description:
Suitable for remote machine protection requirements where machinery may be subject to difficult starting, jamming, high resistive torque/high inertia and/or mechanical failure1 N/O and 1 N/C contactLED status indication: Voltage, Starting, Steady State, Overload, TripManual or electric resetH 67.5mm x ...