Siemens Coupling Contactor Relay 3NO/NC, 10 A, 2.8 W, 110 V dc

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Contactor Relays - 3RH2 Range

Climate-proof, finger safe contactor relays. RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all contactor relays for damping opening surges in the coil.

Size S00
High degree if contact stability at low voltages & current
Suitable for use with solid-state circuits with currents ≥ 1 mA at a voltage of ≥ 17 V
Capable of expansion by up to four contacts through use of snap-on auxiliary switch blocks

Note

The OFF-delay of the NO contact and the ON-delay of the NC contact are increased if the contactor coils are attenuated against voltage peaks (noise suppression diode 6 to 10 times; diode assemblies 2 to 6 times, varistor +2 to 5 ms).

Standards

IEC 60947-1, EN 60947-1, IEC 60947-4-1, EN 60947-4-1, IEC 60947-5-1, EN 60947-5-1.

Siemens Sirius Range Contactor & Control Relays

Specificaties
Kenmerk Waarde
Control Voltage 110 V dc
Contact Current Rating 10 A
Pole Configuration 4P
Range Sirius Innovation
Contact Voltage Rating 600 V dc, 690 V ac
Mounting Style DIN Rail Mount
Supply Voltage 110 V dc
Series 3RH2
Normal State Configuration 3NO/NC
Number Of Auxiliary Contacts 1
Power Rating 2.8 W
Terminal Type Spring Load
Depth 69.5mm
Length 45mm
Width 73mm
Maximum Operating Temperature +60°C
Minimum Operating Temperature -25°C
Operating Temperature Range -25 → +60 °C
2 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
Was 56,55 €
43,20
(excl. BTW)
52,27
(incl. BTW)
Aantal stuks
Per stuk
1 +
43,20 €
Related Products
Creating seamless integration in all automation applications, compactness ...
Description:
Creating seamless integration in all automation applications, compactness ratio and high performance, the TeSys K series is a range of reversing or non-reversing contactors. All 4 pole relays have 10A thermally rated contacts which are suitable for AC or DC ...
The 3RB2 range of Solid State Electronic overloads ...
Description:
The 3RB2 range of Solid State Electronic overloads can be connected directly to Siemens SIRIUS contactors to provide accurate motor overload protection with enhanced single phase sensitivity,Application: Protection of 3 phase AC motors in sinusoidal 50/60Hz network. These relays are ...
The solid-state design of the 193-E1 Plus overload ...
Description:
The solid-state design of the 193-E1 Plus overload relay provides accurate, reliable and repeatable protection. A wide 5:1 adjustment range, dip switch (on EE versions) and isolated contacts provide application flexibility. The line-side over moulded power connections provides a sturdy ...
The 3RB2 range of Solid State Electronic overloads ...
Description:
The 3RB2 range of Solid State Electronic overloads can be connected directly to Siemens SIRIUS contactors to provide accurate motor overload protection with enhanced single phase sensitivity,Application: Protection of 3 phase AC motors in sinusoidal 50/60Hz network. These relays are ...