Siemens Siemens 3SB3 Contact Block 1NC Cage Clamp terminal

  • RS-stocknr. 453-2927
  • Fabrikantnummer 3SB3403-0C
  • Fabrikant Siemens
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Contact Blocks for Mounting On Printed Circuit Boards

Available with cage clamp termination, or with solder pin for PCB connection
Fitted with slow action contacts on moving U-shaped shanks to guarantee positive contact making, even with voltages and current as low as 5V/1mA
For electronic or conventional controls
Rating: 10A (Ith), 300Vac max.

PHASE OUT NOTIFICATION

This product is in obsolescence mode and is due for discontinuation by the manufacturer. We recommend that you review the new pushbutton range SIRIUS ACT which is the alternative range proposed by the manufacturer. Please refer to the 3SB3 / SIRIUS ACT cross-reference guide located in the technical reference section.

Approvals

IEC EN60947-5-1

Specificaties
Kenmerk Waarde
Block Type Contact Block
Contact Configuration 1NC
Series Siemens 3SB3
Terminal Type Cage Clamp
Body/Fixing Collar Included No
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Related Products
All actuators have matt chromed bezels and ingress ...
Description:
All actuators have matt chromed bezels and ingress protection to IP65 as standard. Contact blocks, LED modules and transformers can all be purchased separately. Contact blocks to suit the LBX range of control stations.
To be combined with switchheads for integral LED ...
Description:
To be combined with switchheads for integral LED facilityAccepts stranded or solid wires with or without cable endsDifferent wire sizes can be used: Minimum: 1x24AWG/0.2mm2 without cable end, maximum: 2x14AWG/1.5mm2 without cable end, 2x16AWG/1.5mm2 with cable endsSingle lever action opens ...
Accepts stranded or solid wires with or without ...
Description:
Accepts stranded or solid wires with or without cable endsDifferent wire sizes can be used: Minimum: 1x24AWG/0.2mm2 without cable end, maximum: 2x14AWG/1.5mm2 without cable end, 2x16AWG/1.5mm2 with cable endsSingle lever action opens both cable clampsDesign prevents clamping on insulationVisible indication ...
Introducing the Harmony XB6 series of Contact Block ...
Description:
Introducing the Harmony XB6 series of Contact Block by Schneider Electric. Specifically, the ZB6 range offers you reliability when you most need it. Tested under stringent scenarios & environments, the ZB6 range works incredibly well in many different scenarios and ...