3M 3341 Series, UNC 4-40 Screwlock for use with D-Sub and D Ribbon Connectors

  • RS-stocknr. 749-4702
  • Fabrikantnummer 3341-1S-BULK-PKG
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Mounting Kits

These 3M Jack Screws are #4-40 UNC for both male and female (where applicable) threads.

3M jack screw kits containing 2 of each item (S=short or L=long hex heads)
For coupling IDC cable mount D connectors to corresponding panel mounting connectors
3505-62 (50-way latching bracket) enables rapid connection/disconnection of 50-way metal backshell stock no. 163-1605

Note

Screw kits are supplied in packs of 2 (price quoted is for 2), except stock no. 448-5584 where packs contain two long (19mm) and two (10mm) screws. See ’dimensions’ table for screw types and lengths. For type 3342-3 see stock no. 448-5584 . For bulk packs of 3341-1L and 3341-S see stock numbers 749-4702 and 749-4711 respectively.

Specificaties
Kenmerk Waarde
Type Screwlock
Thread Size UNC 4-40
Screw Length 7.9mm
Overall Length 11.2mm
Material Steel
Connector Type D-sub
For Use With D-Sub and D Ribbon Connectors
Kit Contents Jack Sockets x 2, Lock Washers x 2, Spacers x 2, 4-40 Nuts x 2
Finish Zinc
Series 3341
34 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
722 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,73
(excl. BTW)
2,09
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
1,73 €
25 - 99
1,47 €
100 - 249
1,36 €
250 - 499
1,30 €
500 +
1,23 €
Verpakkingsopties
Related Products
From Deutsch, this plastic panel nut is for ...
Description:
From Deutsch, this plastic panel nut is for use with the HDP20 range of connectors. Sealed to IP67Durable – 100 mating cycles minimumVibration proof – 20g's at 10 - 2000HzCorrosion Resistant – 48hours Salt Spray to MIL STD 1344.
Quick Lock Pin set for use with TE ...
Description:
Quick Lock Pin set for use with TE Connectivity Quick Lock full metal D-Sub miniature back shells. The C variant kits contain M3 threaded latch pins, stainless steel spring and disc washers and M3 nuts. Quick Lock pins are mounted ...
DH Series is an impedance controlled interface connector ...
Description:
DH Series is an impedance controlled interface connector for high speed transmission. It has a 1mm contact mating pitch. This, coupled with a 0.5mm mounting pitch, makes for a more compact, lower-profile, higher-density alternative to conventional half-pitch interface connectors. Depending ...
A range of hard wearing RoHS compliant, IP68 ...
Description:
A range of hard wearing RoHS compliant, IP68 sealed electrical connectors. The thumb latch mechanism and chunky keyway allows for easy connection and disconnection. Back fittings enable either half to be panel mounted or sealed to a cable. A flange ...