3M 3341 Series, Jack Screw Kit

  • RS-stocknr. 448-5556
  • Fabrikantnummer 3341-4
  • Fabrikant 3M
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Mounting Kits

These 3M Jack Screws are #4-40 UNC for both male and female (where applicable) threads.

3M jack screw kits containing 2 of each item (S=short or L=long hex heads)
For coupling IDC cable mount D connectors to corresponding panel mounting connectors
3505-62 (50-way latching bracket) enables rapid connection/disconnection of 50-way metal backshell stock no. 163-1605

Note

Screw kits are supplied in packs of 2 (price quoted is for 2), except stock no. 448-5584 where packs contain two long (19mm) and two (10mm) screws. See ’dimensions’ table for screw types and lengths. For type 3342-3 see stock no. 448-5584 . For bulk packs of 3341-1L and 3341-S see stock numbers 749-4702 and 749-4711 respectively.

Specificaties
Kenmerk Waarde
Type Jack Screw Kit
Overall Length 20.6mm
Series 3341
59 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1095 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
1,87
(excl. BTW)
2,26
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
1,87 €
10 - 24
1,68 €
25 - 49
1,53 €
50 - 99
1,44 €
100 +
1,32 €
Related Products
The Birtcher Products range of PCB-Retainers have been ...
Description:
The Birtcher Products range of PCB-Retainers have been designed primarily for use in sheet metal applications and feature a low-cost sprint action card retainer design. The PCB retainers provide outstanding protection against harsh environments, moderate shock and vibration. Low-cost sprint ...
The Birtcher Products range of Lok-Retainers have been ...
Description:
The Birtcher Products range of Lok-Retainers have been professionally designed to retain printed circuit board in harsh environments, moderate shock and vibration. The highly economical range of Lok-tainers offer a rugged, compact finish and provide outstanding protection in both sheet ...
From Deutsch, this plastic panel nut is for ...
Description:
From Deutsch, this plastic panel nut is for use with the HDP20 range of connectors. Sealed to IP67Durable – 100 mating cycles minimumVibration proof – 20g's at 10 - 2000HzCorrosion Resistant – 48hours Salt Spray to MIL STD 1344.
DH Series is an impedance controlled interface connector ...
Description:
DH Series is an impedance controlled interface connector for high speed transmission. It has a 1mm contact mating pitch. This, coupled with a 0.5mm mounting pitch, makes for a more compact, lower-profile, higher-density alternative to conventional half-pitch interface connectors. Depending ...