Cypress Semiconductor, FX3 SuperSpeed USB Development Kit - CYUSB3KIT-003

Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

Cypress Semiconductor USB Development Kit

The Cypress Semiconductor USB development kit is a super speed USB 3.3 peripheral controller providing integrated and flexible features. It has a fully configurable, parallel, a general programmable interface called GPIF II, which can connect to any processor, ASIC or FPGA. It provides easy and glueless connectivity to popular interfaces such as asynchronous SRAM, asynchronous and synchronous address data multiplexed interfaces and parallels ATA. It has an integrated USB 3.1 Gen 1 and USB 2.0 physical layers (PHYs) along with a 32-bit ARM926EJ-S microprocessor for powerful data processing and for building custom applications. It implements an architecture that enables 375MBps data transfer from GPIF II to the USB interface.
Kit Contents:
FX3 Development board
USB 3.0 Type-A to Type-B cable
Quick start guide
Jumpers (4)

Features and Benefits

Full USB 3.0 peripheral controller with a built-in PHY
ARM9 with 512KB RAM for data processing gives high performance
I2S, SPI and UART peripherals for connectivity
Low 1.2V core and independent power domains
Selectable XTAL input from 19.2, 26, 38.4 and 52MHz
32 configurable endpoints
Operating temperature ranges between -40°C and 85°C

Applications

Digital video camcorders
Digital still cameras
Printers
Scanners
Video capture cards
Test and measurement equipment
Surveillance cameras
Personal navigation devices
Medical imaging devices
Video IP phones
Portable media players
Industrial cameras
Data loggers
Data acquisition
High-performance human interface devices

Certifications

ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Kit Classification Development Kit
Kit Name FX3 SuperSpeed
6 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
16 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
40,55
(excl. BTW)
49,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
40,55 €
Related Products
The ST25DV-DISCOVERY is a demonstration kit to evaluate ...
Description:
The ST25DV-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the ST25DV series of dynamic NFC/RFID tag ICs. • 168MHz STM32F415VGT6 Cortex-M4F MCU with 1MB Flash memory, 192 + 4KB SRAM • On-board ST-LINK hardware for microcontroller ...
The SigFox click is a device which carries ...
Description:
The SigFox click is a device which carries the SN10-11, a fully integrated module by InnoComm, allowing connection to a low power wide area network (LPWAN) that enables communication utilizing the Industrial, Scientific, and Medical (ISM) radio frequency band. The ...
Based on the RSL10 System-in-Package (SiP)Bluetooth 5 certifiedConfigurable, ...
Description:
Based on the RSL10 System-in-Package (SiP)Bluetooth 5 certifiedConfigurable, low-power sensorsNOA1305 (Ambient light)BHI160 (Integrated low power smart hub, 3-axis accelerometer, 3-axis gyroscope) BMM150 (Low Power, Low Noise 3-axis digital geomagnetic sensor)BME680 (Integrated high-accuracy gas, pressure, ...
XinaBox produces a range of 80+ modular “xChips”, ...
Description:
XinaBox produces a range of 80+ modular “xChips”, which includes cores/CPUs, sensors, power, communication, output, and storage. xChips can be clipped together in seconds using a connectivity standard without wires, soldering, breadboards or any consumables: no hardware knowledge is required ...