RS PRO 50Ω Straight Flange Mount BNC ConnectorBulkhead Fitting, jack

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

Panel sockets

RS PRO Silver Plated Flange BNC Connector

From RS PRO, this BNC panel socket connector is designed for use with coaxial cables, and features an easy-to-terminate solder pin design. The connector has a solid integrated flange for secure panel fixing.

The connector has a robust nickel plated body, and features the secure and convenient bayonet coupling system typical of a BNC connector. The centre pin contact is silver plated, for excellent conductivity, and there is also a PTFE insulator for increased reliability.

Features and Benefits

• BNC panel socket
• Robust flange
• Silver lated contact ensure conductivity
• Solder pin termination method
• 50Ω impedance
• Insulation material: PTFE

Applications

BNC connectors are used in a variety of RF signal applications. Though they are most commonly used in radio and television broadcast applications, they can also be used in medical and test equipment.

• Antenna connection
• Cable Modems
• Telecom
• Medical Equipment
• Satcom
• CCTV

FAQs

Q: How should I connect a BNC connector to a coaxial cable?

A: This BNC has a solder pin termination, meaning it requires a soldering kit to attach to an appropriate cable.

Why RS PRO?

RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; they’re only given the RS PRO Seal of Approval if we’re confident of their exceptional quality, which means you can be confident too.

Approvals

-

RS Silver Plated BNC

Brass-bodied connectors with PTFE insulators and beryllium copper female contacts. Available in crimp or clamp options. For information regarding appropriate crimp tooling please refer to the Connector/Cable/Tooling Compatability table at the beginning of this section. Cut-outs are illustrated for respective connector types.,Miniature bulkhead socket also available (which does not mate with standard BNC connectors).

Specificaties
Kenmerk Waarde
Gender Female
Coaxial Connector Type BNC Connector
Mounting Type Flange Mount
Impedance 50Ω
Termination Method Solder
Body Orientation Straight
Bulkhead Yes
Operating Frequency 4GHz
Body Plating Silver
Polarity Normal
Contact Material Copper
Contact Plating Silver
1608 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
3,79
(excl. BTW)
4,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 24
3,79 €
25 - 49
3,39 €
50 - 99
3,22 €
100 - 249
3,16 €
250 +
2,86 €
Related Products
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection ...
75 Ohm ZDC BNC RF coaxial insulated bulkhead ...
Description:
75 Ohm ZDC BNC RF coaxial insulated bulkhead socket connectors with bayonet coupling, solder termination and ground tab. These 75 Ohm BNC RF coax insulated bulkhead socket connectors are front panel mounting with a PBT insulator, thermoplastic dielectric, a nickel ...
ZDC series PCB mount RF coaxial BNC socket ...
Description:
ZDC series PCB mount RF coaxial BNC socket connectors with MIL-C-39012 and MIL STD348A compatible interfaces and precision cast nickel plated zinc body. These ZDC series PCB mount RF coaxial jacks have a bayonet coupling for a quick mating connection ...
75 Ohm Professional Grade BNC front mount bulkhead ...
Description:
75 Ohm Professional Grade BNC front mount bulkhead solder jack with ABS dielectric, solder terminal, nickel plated body and silver center contact. This 75 Ohm Professional Grade BNC bulkhead solder jack uses a panel cut out of 8.9 x 9.6mm ...