Megger Clamp Meter, Max Current 100A ac CAT III 300 V

  • RS-stocknr. 179-4712
  • Fabrikantnummer 2009-574
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TW
Productomschrijving

The DCM305E is designed to check earth leakage currents, however the upper range enables TRMS AC current measurements of up to 100 A. TRMS meters can measure both pure, undistorted, sinusoidal AC waveforms and non-sinusoidal AC waveforms which can contain pulse trains, triangles, spikes and other ragged waves.The instrument has six ranges: 6 mA, 60 mA, 600 mA, 6 A, 60 A100 A with a minimum resolution of 0.001 mA on the 6 mA range. Either auto or manual ranging can be selected. Harmonics / electrical noise on the cables / circuit under test can give rise to incorrect readings so the DCM305E features a low pass filter (50/60 Hz) which vastly improves measurements on these particular circuits.

0.001 mA resolution
Up to 100 A AC
TRMS reading
Low pass filter to aid stability of readings
Auto, data & peak hold
40 mm jaw

Specificaties
Kenmerk Waarde
Absolute Maximum AC Current Measurement 100A ac
Calibrated UKAS
AC Current Measurement Resolution 0.001mA
Best AC Current Accuracy ±10 % + 10 digit
Power Source Battery
Display Type Backlight
Jaw Capacity Busbars 40mm
Dimensions 78 x 42 x 203mm
Minimum Operating Temperature 0°C
Maximum Conductor Size 750mm
Safety Category Level CAT III
Battery Life 60 h
Length 78mm
Maximum Operating Temperature +50°C
Safety Category Voltage 300V
Weight 300g
Battery Type AAA
Safety Category CAT III 300 V
Height 203mm
Width 42mm
True RMS Yes
6 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
342,00
(excl. BTW)
413,82
(incl. BTW)
Aantal stuks
Per stuk
1 +
342,00 €
Related Products
Digital AC and DC clamp meter with True-RMS ...
Description:
Digital AC and DC clamp meter with True-RMS reading, Dual hall sensor and a Nickel-Steel alloy jaw mechanism. True-RMS reading4000 Count digital displayAuto-rangingDual hall sensorNickel-Steel alloy jaw mechanismAC-DC 300 AAC-DC 600 V0.5% basic DC Voltage accuracy1.5% basic AC Voltage accuracy1.0% ...
RS Pro IEK10N Digital Multimeter with Current Clamp. ...
Description:
RS Pro IEK10N Digital Multimeter with Current Clamp. 300 A ac non-intrusive current measuringVoltage measurement to 600 V ac/dcOhms ranges from 300 Ω → 30 MΩ3200 Count display (0.1 mV resolution at 300 V)65 segment analogue bar graphMains proof ohms ...
Designed to verify the presence of load current, ...
Description:
Designed to verify the presence of load current, voltage and resistence, etc.The small bodies and jaws fit perfectly in your hand and a large backlit display is easy to read.Test lead mA range with high 1 mA resolution for HVAC ...
The FLIR CM46 clamp meter is designed for ...
Description:
The FLIR CM46 clamp meter is designed for commercial and residential electricians. Featuring both AC/DC measurement, the meter is equipped with a bright backlit display for use inside electrical panels. Accu-Tip™ technology delivers amperage measurements on smaller-gauged wires more accurately ...