ITT Cannon Male Dust Cap, Shell Size 16 IP67 Rated

  • RS-stocknr. 273-5269
  • Fabrikantnummer 192900-0379
  • Fabrikant ITT Cannon
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: HU
Productomschrijving

Dust Caps

Plastic dust-caps for plug and socket panel housings. Only the shell size is required to determine the correct cap. Caps include a plastic retaining strap.

//media.rs-online.com/t_line/L273537-21.gif

Neptune

Based on Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available.,To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires : 2.7 to 4.0mm.,Number of contacts shown as power/signal eg 2//13.

Specificaties
Kenmerk Waarde
Gender Male
Shell Size 16
IP Rating IP67
Panel Mount Fitting Yes
Material Polymer
Colour Black
39 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
4,85
(excl. BTW)
5,87
(incl. BTW)
Aantal stuks
Per stuk
1 - 19
4,85 €
20 - 39
4,36 €
40 +
3,93 €