- RS-stocknr.:
- 167-9758
- Fabrikantnummer:
- TNA24CC-HC00L / 192900-0498
- Fabrikant:
- ITT Cannon
375 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Per stuk
€ 24,02
(excl. BTW)
€ 29,06
(incl. BTW)
Aantal stuks | Per stuk |
1 + | € 24,02 |
- RS-stocknr.:
- 167-9758
- Fabrikantnummer:
- TNA24CC-HC00L / 192900-0498
- Fabrikant:
- ITT Cannon
Wetgeving en conformiteit
- Land van herkomst:
- HU
Productomschrijving
ITT Cannon Backshell
The ITT Cannon Trident Neptune series backshell is a circular connector with 24 shell size, membrane wire seal equipment. The connector body is made from black nylon material with nickel-plated copper alloy coupling ring and stainless steel bayonet pins. It accepts various combinations of signal (13A) and power (30A) contacts.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal, which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, they feature a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal, which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Features and Benefits
Durability of 500 mating cycles
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
Specificaties
Kenmerk | Waarde |
---|---|
Length | 128.5mm |
- RS-stocknr.:
- 167-9758
- Fabrikantnummer:
- TNA24CC-HC00L / 192900-0498
- Fabrikant:
- ITT Cannon