- RS-stocknr.:
- 167-9742
- Fabrikantnummer:
- TNA16CC-HC00L / 192900-0497
- Fabrikant:
- ITT Cannon
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 04/06/2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 12,74
(excl. BTW)
€ 15,42
(incl. BTW)
Aantal stuks | Per stuk |
1 - 19 | € 12,74 |
20 - 39 | € 11,46 |
40 + | € 10,31 |
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 167-9742
- Fabrikantnummer:
- TNA16CC-HC00L / 192900-0497
- Fabrikant:
- ITT Cannon
Wetgeving en conformiteit
- Land van herkomst:
- HU
Productomschrijving
ITT Cannon Backshell
The ITT Cannon Trident Neptune series backshell is a circular connector with 16 shell size, membrane wire seal equipment. The connector body is made from black nylon material with nickel-plated copper alloy coupling ring and stainless steel bayonet pins. It accepts various combinations of signal (13A) and power (30A) contacts.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, it features a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Neptune:
Based on the Trident Ringlok series, the Neptune range combines power and signal contacts. Widely used in automotive, marine and process control industries, it features a strong bayonet coupling system with standard and reversed pin/socket combinations. A wide selection of backshell accessories, rear housings and dust caps are available. To maintain IP67 rating the rear of the connectors have a rubber seal which is pierced upon contact insertion. The seal is held in place by a screw ring (as supplied) which may be replaced with the appropriate size backshell. For IP67 rating to be maintained, wire insulation diameters should be within the following diameters: Signal wires: 1.7 to 2.7mm, Power wires: 2.7mm to 4.0mm. The number of contacts shown as power/signal e.g. 2/13.
Features and Benefits
Durability of 500 mating cycles
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage is up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
Full interface and cable sealing
Insulation resistance of 5000Mohm
Operating temperature ranges between -55°C and 105°C
Operating voltage is up to 250VAC RMS
Printed circuit and coaxial contacts
Robust and cost-effective
Specificaties
Kenmerk | Waarde |
---|---|
Length | 89.8mm |
- RS-stocknr.:
- 167-9742
- Fabrikantnummer:
- TNA16CC-HC00L / 192900-0497
- Fabrikant:
- ITT Cannon