Seeit Leaper-56 Pocket-size FLASHBIOS, Universal Programmer for Flash Memory Devices

  • RS-stocknr. 772-3050
  • Fabrikantnummer FLASHBIOS
  • Fabrikant Seeit
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

FLASHBIOS, Low-Cost Universal Programmer for EPROM/EEPROM/Flash, with USB

The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C and SPI EEPROMs memory (24Cxx, 25Cxx) and SPI FLASH memory (25Fxxxx) until 256Mb. It is equipped with a LED indicating the different status of the programmer, a USB port, a high quality tulip socket supporting devices in DIP packages of 8, 24, 28 or 32 pins and a PLCC32 socket supporting any 32-pin FLASH memory. The FlashBios connects to the USB port of any compatible PC and does not require any external power supply which makes it very practical to use at the office or on a business trip. Its integrated supply runs all the devices requiring a supply of 2.5V / 3.3V / 5.0V / 12V / 12.5V / 13V / 21V and 25V. New 32-pin devices can be added to the software list on request and the updates can be downloaded freely from our website. The software works with Windows 98/ME/2000/XP/Vista/Windows7 (32-bit and 64-bit).

Accepts standard file formats: BINARY, INTEL (Extended) HEX, INTEL HEX16, Motorola S19/S28/S37 records
Read / Write / Blank-Check Write / Verify / Blank-Check / Erase functions
Support low voltage devices from 2.5V to 5.0V
Support high Vpp programming voltage: 12V / 12.5V / 13V / 21V / 25V
No need of exterior adapter for all DIP package devices : DIP8, DIP24, DIP28 and DIP32
PLCC32 adapter on board to program parallel FLASH memory
SPI connectors to program on board devices, (Gnd, Vdd, Vpp, DATA0, DATA1, DATA2, DATA3, DATA4, DATA5, DATA7)
Supports Windows 98 / ME / 2000 / XP / Vista / Windows 7 (32-bit and 64-bit) with 10MB of spare capacity
Dimensions board: 140 x 100 x 15 mm

Kit Contents

Programmer with tulip DIP8 and DIP32 package, PLCC32 and SPI connector
USB cable
Software on CD-ROM

PC Based Programmers

Specificaties
Kenmerk Waarde
Accessory Type Universal Programmer
For Use With Flash Memory Devices
Interface USB 1.1
Programmer Name Leaper-56 Pocket-size
Memory Type Programmed EEPROM, EPROM, FLASH, NVRAM
6 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
110,95
(excl. BTW)
134,25
(incl. BTW)
Aantal stuks
Per stuk
1 +
110,95 €
Related Products
The Microchip Technology MPLAB snap debugger programmer is ...
Description:
The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also ...
The PIC-01 allows you to program Microchip serial ...
Description:
The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 ...
The Dataman 40Pro is a PC based universal ...
Description:
The Dataman 40Pro is a PC based universal 40-pin programmer with ISP capabilities and USB 2.0 connectivity. The 40Pro is built to meet the demands of development labs and field engineers for universal and portable programming.,Dataman 40Pro is a small, ...
This USB-based emulator provides an easy, portable, non-intrusive, ...
Description:
This USB-based emulator provides an easy, portable, non-intrusive, target-based debugging solution for Analog Devices JTAG processors and DSPs. It performs a wide range of emulation functions, including single-step and full speed execution with pre-defined breakpoints, and viewing and/or altering of ...