MPLAB Snap debugger programmer

  • RS-stocknr. 177-4116
  • Fabrikantnummer PG164100
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: CN
Productomschrijving

Microchip Technology MPLAB Snap Debugger

The Microchip Technology MPLAB snap debugger programmer is a powerful 32-bit 300MHz SAM E70 Arm® Cortex®-M7 based MCU meant for quicker debug iterations. This MPLAB programmer supports 4-wire JTAG and serial wire debug with streaming data gateway. It is also backward compatible for demo boards, headers and target systems using 2-wire JTAG and ICSP.

Features and Benefits:

• Affordable
• An 8-pin SIL programming connector and the option to use various interfaces
• Connects to computer via high-speed USB 2.0 (480) cable
• Fast and easy debugging and programming
• Program devices using MPLAB X IDE or MPLAB IPE
• Support target supply voltage ranges between 1.2V to 5.5V

Applications:

• Electronics industry
• Embedded programming

Certifications:

• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007
• CE certified

Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 13/03/2020, met een levertijd van 1 werkdag.
Prijs Each
14,22
(excl. BTW)
17,21
(incl. BTW)
Aantal stuks
Per stuk
1 +
14,22 €
Related Products
The PIC-01 allows you to program Microchip serial ...
Description:
The PIC-01 allows you to program Microchip serial PIC microcontrollers, (PIC12Cxxx, PIC12CExxx, PIC12Fxxx, PIC16Cxxx, PIC16CExxx, PIC16Fxxx, and PIC18Fxxxx families), as well as serial EEPROMs Series, (24Cxx family).Equipped with 5 tulip sockets, supports components in DIP packages of 8, 18, 28 ...
The FlashBios is a device Reader/Programmer/Copier supporting CMOS ...
Description:
The FlashBios is a device Reader/Programmer/Copier supporting CMOS EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C ...
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs ...
Description:
The FlashBiosBox is a device Reader/Programmer/Copier supporting EPROMs (2716 to 27C801 family) of 16Kb to 8Mb, parallel EEPROMs (28C16 to 28C040 family) up to 4Mb, parallel FLASH memory (28xxx, 29xxx, 37xxx, 39xxx, 49xxx, etc) of 512Kb to 8Mb, I²C and ...
The MULTIPIC allows you to program over 650 ...
Description:
The MULTIPIC allows you to program over 650 different PIC microcontrollers from Microchip (PIC10Fxxx, PIC12Fxxx, PIC16Fxxx, PIC18Fxxx, PIC24Fxxx, PIC24Hxxx, dsPIC30Fxxx, PIC32MXxxx and dsPIC33Fxxx). The board includes different tulip sockets for various components in DIP with 8, 14, 18, 20, 28 ...