Reliance Brass Double Non Return Valve Floguard 1-1/2 in BSP Female

Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: CN
Productomschrijving

Floguard® Double Check Valves

The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999.
Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with the exception of the Minislim, which can be supplied nickel plated

Compact lightweight construction for easy installation
Allows high flow rate with minimum pressure drop, giving good flow rates
Ideal for all Class 3 contamination risks as per Water Supply (water fittings) Regulations 1999
Integral test point for monitoring correct functioning of the downstream check valve

Approvals

WRAS

Specificaties
Kenmerk Waarde
Type Double
Connection 1-1/2 in BSP Female
Body Material Brass
Maximum Working Pressure 10 bar
Thread Size 1-1/2in
Thread Standard BSP
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 10/02/2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
87,84
(excl. BTW)
106,29
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
87,84 €
5 - 9
85,14 €
10 +
82,40 €
Related Products
316L stainless steel construction, fully machined from quality ...
Description:
316L stainless steel construction, fully machined from quality forgingsEPDM sealsCreep resistant bearingsReinforced nylon handleReduced risk of contamination by top and bottom sealsOperating temperature -10ºC to +120°CWorking pressure 0.9 bar to 10 barPolished disc.
These Float Valves are suitable for pressures up ...
Description:
These Float Valves are suitable for pressures up to 14 bar (206 psi). WRC approvedRubber diaphragmDischarge above overflow level prevents back siphonage - meets requirements of Byelaw 42No hiss or prolonged shut-off noiseThumbscrew on lever provides vertical and horizontal adjustment ...
A range of bronze globe valves, individually hydrostatically ...
Description:
A range of bronze globe valves, individually hydrostatically tested to BS 5154 at the following test pressures: Shell: 48 bar, Seat: 35.2 barRising StemThreaded bonnetRenewable disc which is suitable for steam serviceBronze trim with glass filled PTFE diskBS21 Taper thread ...
Female screwed type bronze globe valves. These inline ...
Description:
Female screwed type bronze globe valves. These inline stop valves can be used in many applications including steam, water, oil and air. • Rising stem• PTFE renewable disk• High-quality PTFE packing• Body design conditions: PN32• 198°C at 14 bar, 100°C ...