RS PRO Brass Single Non Return Valve 1/2 in BSPP

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: IT
Productomschrijving

S.120 spring loaded non return brass valve

Application : Industry, pneumatics, hydraulic, plumbing installations
Operating Temperature : -20゚C / +100゚C
Operating pressure : see non-shock cold working pressure chart on data sheet
Threads : ISO 228 parallel female by female threads
Stem : Nylon
NBR 65 SH/PS seal on nylon holder
Stainless steel spring
Performs well in any orientation
100% Made in Italy

Note

Approvals apply to specific configurations only

Approvals

GOST-R (Russia)
Expert Conclusion (Russia)
EAC Conforming (Russia)
RoHS Compliant

Standards

BS 2779

Warning

  • Freezing of the fluid in the installation may severely damage the valve
Specificaties
Kenmerk Waarde
Type Single
Connection 1/2 in BSPP
Body Material Brass
Maximum Working Pressure 12 bar
Thread Size 1/2in
Thread Standard BSPP
13 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
110 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
Was 9,95 €
8,46
(excl. BTW)
10,24
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
8,46 €
5 - 9
8,20 €
10 +
7,93 €
Related Products
The Floguard range of double check valves is ...
Description:
The Floguard range of double check valves is used for the prevention of back-flow and back-syphonage contamination risks in accordance with the water supply (water fittings) Regulations 1999.Manufactured from DZR brass the WRAS approved Floguard range is supplied unplated with ...
Valves are manufactured in accordance with BS 5154 ...
Description:
Valves are manufactured in accordance with BS 5154 PN20 series B and are BSI Kitemark approved.Also suitable for use in class 125 imperial systems specifying valves to BS 1952 at rating: 250 Ibf /in² CWP: 125Ibf/ in² at 353°FSolid wedge ...
Hot forged brass gate valve and DZR brass ...
Description:
Hot forged brass gate valve and DZR brass gate valve with forged brass screwed bonnet, non rising stem and solid wedge discManufactured to BS5154/B - PN 20BS1 kitemark approved: License no. KM-06254.
Automatic Anti-Vacuum Valve for use with hot water ...
Description:
Automatic Anti-Vacuum Valve for use with hot water heaters to prevent a vacuum forming in installations where there is the potential of the draw off rate exceeding the rate of flow to the inlet; this can occur in properties with ...