Megger MTB7671/2 Check Box, Test Type Continuity, Insulation, Loop, PFC, RCD With RS Calibration

  • RS-stocknr. 498-814
  • Fabrikantnummer MTB7671/2
  • Fabrikant Megger
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Megger MTB7671 Test Box

Test box designed to provide confirmation that electrical installation testers continue to operate properly, and maintain their accuracy and consistency between calibrations.

Tests the full range of a testers capability.
Does not trip RCD protected circuits.
Tests to regulations BS7671, BS EN61557 & IEE On-Site Guide.
Checks insulation, continuity, loop, PFC & RCD functions.
The test box is protected by a 30 mA RCD to ensure any faulty testers cannot cause an unsafe situation.
Check of any voltage measurement ranges on the instrument.
Colour coded test functions.
Meets the safety requirements of IEC61010.
Dimensions: 320 x 280 x 100mm.
Weight: 2.2kg.

Note

Additional history cards & test labels are available see stock no. 480-302

Supplied with

10 history cards and 160 “Instrument tested” labels, manual & Calibration Certificate produced and dated at time of manufacture.

Specificaties
Kenmerk Waarde
Test Type Continuity, Insulation, Loop, PFC, RCD
Calibrated RSCAL
Includes History Card x 10, Label
Dimensions 320 x 280 x 100mm
Weight 2.2kg
Height 100mm
Length 320mm
Maximum Operating Temperature +40°C
Minimum Operating Temperature 0°C
Width 280mm
2 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
765,00
(excl. BTW)
925,65
(incl. BTW)
Aantal stuks
Per stuk
1 +
765,00 €
Related Products
The ELC 1% decade capacitance box can be ...
Description:
The ELC 1% decade capacitance box can be adjustable via a rotary control. This box uses polystyrene and polypropylene capacitors offering high-accuracy, a low-temperature coefficient (125ppm/°c) and high-insulation resistance. This is robust, easy to install and has robust switches with ...
Introducing a new range of ATEX certified junction ...
Description:
Introducing a new range of ATEX certified junction boxes from CE-TEK. All the boxes in the range incorporate factory fitted DIN Rail mounted, terminal connector blocks and are pre-punched with M20/ M25 cable gland entry apertures (each supplied with EX ...
The KL series terminal boxes from Rittal are ...
Description:
The KL series terminal boxes from Rittal are the perfect protection and safety barrier for electrical connections. These junction boxes are made from sheet steel and painted in a light grey RAL 7035 finish to withstand harsh environments. The folded ...
The KL series terminal boxes from Rittal are ...
Description:
The KL series terminal boxes from Rittal are the perfect protection and safety barrier for electrical connections. These junction boxes are made from sheet steel and painted in a light grey RAL 7035 finish to withstand harsh environments. The folded ...