RS PRO 12VA 2 Output Chassis Mounting Transformer, 15V ac

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: PL
Productomschrijving

Chassis Mount Clamp & Frame Construction 115/230Vac Primary Transformer

Double section bobbin construction
Fully shrouded bobbins
Full varnish impregnation
Two hole fixing wrap-over clamps 6VA to 50VA
Multi-hole frame fixing 100VA
Solder tag terminations
Optional terminal shrouds
100% electrical and flash tested
Tested in accordance with BS3535 and EN 60 742

Note

Suitable transformer shrouds: 6VA = 503-912 ; 12 & 20VA = 504-004 ; 50, 75 & 100VA = 503-928

Approvals

8888

Standards

BS3535; EN 60 742

Open Laminated Clamp & Frame 115-230Vac Primary 6VA to 100VA

Chassis mounting mains transformers with twin 115Va.c. 50/60Hz primary windings which may be connected in series for 230V or parallel for 115V operation. The two independent secondary windings may be connected in series or parallel to give a wide range of output voltage and current options.

Specificaties
Kenmerk Waarde
Primary Voltage Rating 115V ac, 230V ac
Secondary Voltage Rating 15V ac
Power Rating 12VA
Number of Outputs 2
Mounting Type Clamp Mount
Length 59mm
Width 50mm
Depth 50mm
Dimensions 59 x 50 x 50mm
Fixing Hole Diameter 4.7 x 8.7mm
Weight 400g
Minimum Operating Frequency 50Hz
Maximum Operating Frequency 60Hz
65 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
13,00
(excl. BTW)
15,73
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
13,00 €
10 - 24
10,73 €
25 - 49
9,87 €
50 - 99
9,08 €
100 +
8,66 €
Related Products
Secondary voltages are nominal load voltages on resistive ...
Description:
Secondary voltages are nominal load voltages on resistive loads.Only the pins indicated on the wiring diagram "physically" exist.
MYRRA encapsulated electronic transformers are Switched Mode Power ...
Description:
MYRRA encapsulated electronic transformers are Switched Mode Power Supplies based on Flyback topologyThey are an interesting alternative to the traditional supply in the most common applications of power lower than 5WENERGY SAVING due to high efficiency and low standby powerThe ...
Isolation converter transformer, low profile, with maximum isolation ...
Description:
Isolation converter transformer, low profile, with maximum isolation voltage of 1500VrmsSpecifically designed to provide isolated RS-232 interface, see Maxim integrated circuit MAX251 (stock no. 540-2142)Printed circuit board standard pinout (2·54mm).
Isolation converter transformer with isolation voltage of 2.5 ...
Description:
Isolation converter transformer with isolation voltage of 2.5 kVrms (78485 types) and 4 kVrms (78482 types)Specifically designed to provide isolated RS-485 and RS-232 interfaceAnalog Devices integrated circuit AMD2452E compatableIndustry standard pinout, low profile package3.3V and 5V versions with frequency range ...