Ceramic Heating Element, 400mm, 200 W, 230 V ac

Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: FR
Productomschrijving

Cold-formed heating resistors

Formable heating resistors can take on any shape after forming and may therefore be used to replace faulty specific resistors, or in a normal capacity on injection nozzles, sheaths and cylindrical parts.
The internal bend radius is 8 mm for the round sleeve and 7 mm for the square section.
The resistor must be formed to be slightly smaller than the part that will be heated, to ensure good contact.
The heating length must be determined according to the part to be heated.
A formed CFR may not be reformed.

Strip Heating Elements

Note

To obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them

Approvals

UL Recognised; CSA Certified

Warning

  • For reasons of safety the heater block and/or heater sheath must be bonded to earth
Specificaties
Kenmerk Waarde
Heating Element Form Formable Coil Heaters
Power Rating 200 W
Supply Voltage 230 V ac
Length 400mm
Width 3.7mm
8 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
98,06
(excl. BTW)
118,65
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
98,06 €
5 - 9
95,12 €
10 +
91,20 €
Related Products
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap ...
In order to obtain optimum performance from these ...
Description:
In order to obtain optimum performance from these products, it is advised that temperature sensing and control elements be used with them. Cartridge heaters have high temperature lead wires that can stand temperature of up to 450̊CHigh impact ceramic cap ...
Mounting brackets for use with ceramic heating elements ...
Description:
Mounting brackets for use with ceramic heating elements (e.g 348-8920).
These heating elements are extremely energy efficient converting ...
Description:
These heating elements are extremely energy efficient converting 96% of the input power to heat with a maximum temperature of 700ºC. 5000 - 10,000 hours working life Available in two sizes and with or without integral type K thermocouple for ...