Infineon TLE6250GXUMA1, CAN Transceiver 1MBd 1-Channel ISO/DIS 11898, 8-Pin DSO

  • RS-stocknr. 823-5541
  • Fabrikantnummer TLE6250GXUMA1
  • Fabrikant Infineon
Datasheets
Wetgeving en conformiteit
Conform
Productomschrijving

CAN Bus Tranceivers, Infineon

Infineon’s CAN (Control Area Network) transceivers are designed for use in the automotive industry. The data rate can go up to 1Mbps and they have different features including receive only mode, INH output as well as Bus wake up inputs. The Automotive CAN Transceiver is used to working in tough environments and may even be apply in modern vehicles like Body, Safety and Powertrain.

ISO 11898 International Standard

CAN Bus (Controller Area Network) Communication

Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also used in other areas.
CAN transceivers allow protocol layer CAN controllers to access the physical layer bus.

Specificaties
Kenmerk Waarde
Maximum Data Rate 1MBd
Number of Transceivers 1
Standard Supported ISO/DIS 11898
Power Down Mode Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type DSO
Pin Count 8
Dimensions 5 x 4 x 1.45mm
Length 5mm
Width 4mm
Height 1.45mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +150 °C
Minimum Operating Supply Voltage 4.5 V
Automotive Standard AEC-Q100
Minimum Operating Temperature -40 °C
40 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
165 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
1,194
(excl. BTW)
1,445
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 20
1,194 €
5,97 €
25 - 120
1,028 €
5,14 €
125 - 620
0,792 €
3,96 €
625 - 1245
0,694 €
3,47 €
1250 +
0,548 €
2,74 €
*prijsindicatie
Verpakkingsopties
Related Products
From Microchip the MCP25612FD is a dual CAN ...
Description:
From Microchip the MCP25612FD is a dual CAN Transceiver that supports both CAN 2.0 (Classic) and CAN FD (Flexible Data-rate) physical layer requirements, allowing designers to build flexibility into their CAN based applications. This IC offers the features of two ...
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, ...
Description:
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, DFN and SOIC packages MCP2003-LIN-compatible driver with WAKE pin MCP2004-LIN-compatible driver with FAULT/TXE pin. This device provides a bidirectional, half-duplex communication physical interface. The device is short circuit and overtemp protected ...
Fully Compatible with the ISO11898 Standard±8kV ESD Contact ...
Description:
Fully Compatible with the ISO11898 Standard±8kV ESD Contact Discharge±80V Fault Protection+3.3V Logic Compatible (MAX13054)High-Speed Operation of Up to 1MbpsSlope-Control Mode (MAX13052)Greater than ±12V Common-Mode RangeLow-Current Standby ModeSilent Mode (MAX13053)Thermal ShutdownShort-Circuit ...
LIN is a small, serial, slow, and cheap ...
Description:
LIN is a small, serial, slow, and cheap bus system. LIN is based on one master node and a number of LIN slaves (up to 16). It is a low-cost concept for automobile networks, for which it standardizes the transmission ...