Microchip Technology MCP2551-E/P, CAN Transceiver 1Mbit/s 1-Channel ISO 11898, 8-Pin PDIP

  • RS-stocknr. 177-1626
  • Fabrikantnummer MCP2551-E/P
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: US
Productomschrijving

Microchip Technology CAN Transceiver

The Microchip technology 1 channel, 1Mbit/s CAN transceiver has 8 pins and PDIP package type. This device is a high speed CAN, fault-tolerant device that serves as the interface between a CAN protocol controller and the physical bus. The Local Interconnect Network (LIN) bus supports communication in automotive networks.

Features and Benefits

• An unpowered node or brown out event will not disturb the CAN bus
• Automatic thermal shutdown protection
• Detection of ground fault (permanent dominant) on TXD input
• Externally controlled slope for reduced RFI emission
• High noise immunity due to differential bus implementation
• Implements ISO-11898 standard physical layer requirements
• Low current stand by operation
• O extended (E):-400C to 1250C
• O industrial (I):-400C to 850C
• Power on reset and voltage brown out protection
• Protection against damage due to short circuit conditions (positive or negative battery voltage)
• Protection against high voltage transients
• Suitable for 12V and 24V systems
• Temperature ranges
• Up to 112 nodes can be connected

Specificaties
Kenmerk Waarde
Maximum Data Rate 1Mbit/s
Number of Transceivers 1
Standard Supported ISO 11898
Maximum Supply Current 75 mA
Mounting Type Through Hole
Package Type PDIP
Pin Count 8
Dimensions 0.4 x 0.28 x 0.19in
Length 10.16mm
Width 7.11mm
Height 4.83mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Supply Voltage 4.5 V
Minimum Operating Temperature -40 °C
120 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 60)
0,997
(excl. BTW)
1,206
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
60 +
0,997 €
59,82 €
*prijsindicatie
Related Products
The MCP25625 is a complete, cost-effective and small-footprint ...
Description:
The MCP25625 is a complete, cost-effective and small-footprint CAN solution that can be easily added to a microcontroller with an available SPI interface. The MCP25625 interfaces directly with microcontrollers operating at 2.7V to 5.5V, there are no external level shifters ...
The MEC1704 is customized for embedded and industrial ...
Description:
The MEC1704 is customized for embedded and industrial computing platforms. It is available in extended temperature range of -40oC to +85oC and has 2 The MEC170x is a family of keyboard and embedded controller designs customized for notebooks and industrial ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...
The Maxim family of dual RS232 line drivers ...
Description:
The Maxim family of dual RS232 line drivers and receivers are intended for all EIA/TIA-232E, V.24 and V.28 communications interface. Maxim’s RS232 dual transmitter/receiver will allow applications such as interface translation, modem, laptop as well as RS232 battery-powered systems due ...