High-Speed 1Mbps CAN Transceiver SOIC8

  • RS-stocknr. 170-4339
  • Fabrikantnummer MCP2551T-E/SN
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

MCP2551 CAN Transceivers

The Microchip MCP2551 is a high-speed CAN Transceiver that can operate at speeds of up to 1 Mbps. Serving as an interface between a CAN Controller and the physical bus, the MCP2551 provides differential transmit and receive capability and is fully compatible with ISO 11898. The MCP2551 is suitable for both 12 V and 24 V systems.

Features

Supports 1 Mbps operation
Slope control input
Implements ISO 11898 physical layer requirements
Suitable for 12 V and 24 V systems
Externally controlled slope for reduced RFI emissions
Permanent dominant detect
Low-current standby operation
High noise immunity due to differential bus implementation

CAN Bus Communication - Microchip

6600 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (On a Reel of 3300)
0,838
(excl. BTW)
1,014
(incl. BTW)
Aantal stuks
Per stuk
Per reel*
3300 +
0,838 €
2.765,40 €
*prijsindicatie
Related Products
From Microchip the MCP25612FD is a dual CAN ...
Description:
From Microchip the MCP25612FD is a dual CAN Transceiver that supports both CAN 2.0 (Classic) and CAN FD (Flexible Data-rate) physical layer requirements, allowing designers to build flexibility into their CAN based applications. This IC offers the features of two ...
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, ...
Description:
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, DFN and SOIC packages MCP2003-LIN-compatible driver with WAKE pin MCP2004-LIN-compatible driver with FAULT/TXE pin. This device provides a bidirectional, half-duplex communication physical interface. The device is short circuit and overtemp protected ...
The MCP2561/2FD is a Microchip Technology Inc. second ...
Description:
The MCP2561/2FD is a Microchip Technology Inc. second generation high-speed CAN transceiver. It offers the same features as the MCP2561/2. Additionally, it guarantees Loop Delay Symmetry in order to support the higher data rates required for CAN FD. The maximum ...