Microchip MCP25612FD-E/SL, CAN Transceiver 8MBps 2-Channel CAN 2.0, CAN FD, 14-Pin SOIC

  • RS-stocknr. 145-9107
  • Fabrikantnummer MCP25612FD-E/SL
  • Fabrikant Microchip
Datasheets
Wetgeving en conformiteit
Conform
Land van herkomst: TH
Productomschrijving

MCP25612FD CAN Transceivers

From Microchip the MCP25612FD is a dual CAN Transceiver that supports both CAN 2.0 (Classic) and CAN FD (Flexible Data-rate) physical layer requirements, allowing designers to build flexibility into their CAN based applications. This IC offers the features of two fully independent MCP2561FD CAN Transceivers (except the SPLIT pin) on one chip, making this device optimal for applications where CAN network redundancy is a critical consideration.

Features

Supports both CAN 2.0 and CAN FD physical layer requirements
Optimized for CAN FD (Flexible Data-Rate) at 2, 5 and 8 Mbps Operation
Maximum Propagation Delay: 120 ns
Loop Delay Symmetry: -10%/+10% (2 Mbps)
Two Fully Independent VDDX and VSSX Pins per CAN FD Transceiver
Standby Current: 5 μA per transceiver (typical)

CAN Bus Communication - Microchip

Specificaties
Kenmerk Waarde
Maximum Data Rate 8Mbps
Number of Transceivers 2
Standard Supported CAN 2.0, CAN FD
Power Down Mode Standby
Maximum Supply Current 70 mA
Mounting Type Surface Mount
Package Type SOIC
Pin Count 14
Dimensions 8.65 x 3.9 x 1.25mm
Length 8.65mm
Width 3.9mm
Height 1.25mm
Maximum Operating Supply Voltage 5.5 V
Maximum Operating Temperature +125 °C
Minimum Operating Temperature -40 °C
Minimum Operating Supply Voltage 4.5 V
114 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Tube of 57)
0,754
(excl. BTW)
0,912
(incl. BTW)
Aantal stuks
Per stuk
Per tube*
57 - 57
0,754 €
42,978 €
114 +
0,687 €
39,159 €
*prijsindicatie
Related Products
Controller Area Network (CAN or CAN-bus) is a ...
Description:
Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also ...
Controller Area Network (CAN or CAN-bus) is a ...
Description:
Controller Area Network (CAN or CAN-bus) is a computer network protocol and bus standard designed to allow microcontrollers and devices to communicate with each other without a host computer. It was designed specifically for automotive applications but is now also ...
The MCP2542FD CAN transceiver is designed for high-speed ...
Description:
The MCP2542FD CAN transceiver is designed for high-speed CAN FD applications up to 8Mbps communication speed. The maximum propagation delay was improved to support longer bus length.The device meets the automotive requirements for CAN FD bit rates exceeding 2 Mbps, ...
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, ...
Description:
Stand-alone LIN Transceiver MCP200x family members, 8-pin PDIP, DFN and SOIC packages MCP2003-LIN-compatible driver with WAKE pin MCP2004-LIN-compatible driver with FAULT/TXE pin. This device provides a bidirectional, half-duplex communication physical interface. The device is short circuit and overtemp protected ...