onsemi MC74HCT125ADG Quad-Channel Buffer & Line Driver, 3-State, 14-Pin SOIC
- RS-stocknr.:
- 186-9324
- Fabrikantnummer:
- MC74HCT125ADG
- Fabrikant:
- onsemi
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 19/12/2024, met een levertijd van 2 à 3 werkdagen.
Toegevoegd
Prijs Per stuk (in een verpakking 25)
€ 0,142
(excl. BTW)
€ 0,172
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 25 + | € 0,142 | € 3,55 |
| *prijsindicatie | ||
- RS-stocknr.:
- 186-9324
- Fabrikantnummer:
- MC74HCT125ADG
- Fabrikant:
- onsemi
Datasheets
Wetgeving en conformiteit
Productomschrijving
The MC74HCT125A is identical in pinout to the LS125. The device inputs are compatible with standard CMOS and LSTTL outputs. The MC74HCT125A noninverting buffer is designed to be used with 3 state memory address drivers, clock drivers, and other bus oriented systems. The devices have four separate output enables that are active low.
Output Drive Capability: 15 LSTTL Loads
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 μA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 72 FETs or 18 Equivalent Gates
These are PbFree Devices
Outputs Directly Interface to CMOS, NMOS, and TTL
Operating Voltage Range: 2.0 to 6.0 V
Low Input Current: 1.0 μA
High Noise Immunity Characteristic of CMOS Devices
Chip Complexity: 72 FETs or 18 Equivalent Gates
These are PbFree Devices
Specificaties
Kenmerk | Waarde |
|---|---|
| Logic Family | HCT |
| Logic Function | Buffer |
| IC Type | Buffer & Line Driver IC |
| Number of Channels per Chip | 4 |
| Input Type | LS-TTL |
| Output Type | 3 State |
| Polarity | Non-Inverting |
| Mounting Type | Surface Mount |
| Package Type | SOIC |
| Pin Count | 14 |
| Maximum High Level Output Current | 6mA |
| Maximum Low Level Output Current | 6mA |
| Maximum Propagation Delay Time @ Maximum CL | 36 ns @ 50 pF |
| Dimensions | 8.75 x 4 x 1.5mm |
| Minimum Operating Supply Voltage | 2 V |
| Maximum Operating Supply Voltage | 6 V |
| Automotive Standard | AEC-Q101 |
| Propagation Delay Test Condition | 50pF |