John Guest Brass Push Fit Fitting 15mm

  • RS-stocknr. 468-6197
  • Fabrikantnummer 15HSV
  • Fabrikant John Guest
Datasheets
Wetgeving en conformiteit
N.v.t.
Land van herkomst: GB
Productomschrijving

Service Valve and Service Valve with Tap Connector

Chrome-plated brass valves opened or closed by 1/4 turn mechanism, operated via screwdriver slot
Can be rotated out-of-sight, to help avoid tampering
Large thro' bore for maximum flow
15mm service valve used to isolate part of system to allow for repair or replacement
15mm x 1/2 in BSP service valve with tap connector used to connect 1/2 in tap to supply pipe

SpeedFit Push-in Fittings, Valves & Taps

Speedfit® valves, connectors and couplers, made from Acetal and suitable for hot and cold water systems operating up to 65°C. May be used with 15mm copper or polyethylene pipe. Maximum working pressures are 12 bar at 20°C and 6 bar at 65°C.Unsuitable for use with stainless steel pipe.

Specificaties
Kenmerk Waarde
Fitting Type Service Valve
Material Brass
Push Fit Pipe Size 15mm
Demountable Yes
Thread Size 1/2in
Thread Standard BSP
18 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
18,29
(excl. BTW)
22,13
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
18,29 €
5 - 9
17,55 €
10 +
16,83 €
Related Products
Male brass thread to plastic push-in connector:. Suitable ...
Description:
Male brass thread to plastic push-in connector:. Suitable for central heating systemsPush-fit and demountable connections Corrosion free No scale build upBSI and WRAS approved.
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 ...
Description:
Brass Fittings,Working Pressure: 10 bar at 23°C, 7 bar at 70°C Temperature Range –20 to +70°C. No need to prepare threaded pipe or apply solventEasy and quick to install, simple push-in connectionsSafe, secure and leak-proof, ready for immediate useUnique collet ...
Wade brass imperial tube compression fittings have universal ...
Description:
Wade brass imperial tube compression fittings have universal nuts and compression rings. Their innovative feature is a flat face on the ring, which sits against a similar flat face within the compression nut. When the nut is tightened to the ...
Type 'A' compression fittings are suitable for mechanically ...
Description:
Type 'A' compression fittings are suitable for mechanically joining copper or stainless steel by means of compressing a cone onto the tube without the application of heat.Manufactured to EN 1254 (formerly BS864/2), and carrying the prestigious Kitemark. Kitemark Licence No. ...