Cooper Bussmann, 6A, CT, FF, British Standard Fuse, 690V ac

Datasheets
Wetgeving en conformiteit
N.v.t.
Productomschrijving

Cooper Bussman Bolted Tag Fuse - Fast Acting (FF) HRC Power Fuse Range

Cooper Bussman's bolted tag fuse is essentially a fuse that is fitted with brackets, these brackets allow the fuse to be bolted onto a fuse holder. Predominantly this type of fuse is used within installations as a "weak link". They are designed to break when a fault occurs, such as an overcurrent or short circuit - they are a safety and damage protection measure. Cooper Bussman's fuses are commonly found within a multitude of industrial applications, electrical equipment and wiring systems.

Features & Benefits

• Compact dimensions
• Excellent current limiting features
• High-speed clearance of AC and DC faults
• Featured a melt Point Curve Class IEC 269-4
• Fuse links, specifically designed for the protection of applications
• Conforms to industry standards
• Low voltage fuse

Specificaties
Kenmerk Waarde
Current Rating 6 A
Fuse Size CT
Voltage Rating 690 V ac
Fuse Standard BS 88
Fixing Centres 64.3mm
Tag Width 6.4mm
Fuse Speed FF
High Rupture Capacity Yes
Overall Length 74.6mm
Body Diameter 8.7mm
Body Height 54.8mm
335 op voorraad - levertijd is 1 werkdag(en).
Prijs Each (In a Pack of 5)
4,09
(excl. BTW)
4,95
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 55
4,09 €
20,45 €
60 - 120
3,926 €
19,63 €
125 - 245
3,76 €
18,80 €
250 - 495
3,598 €
17,99 €
500 +
3,434 €
17,17 €
*prijsindicatie
Related Products
These fuses are designed for : “General purpose ...
Description:
These fuses are designed for : “General purpose use” protection (gG type) or motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by ...
These fuses are designed for : “General purpose ...
Description:
These fuses are designed for : “General purpose use” protection (gG type) or motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by ...
These fuses are designed for : “General purpose ...
Description:
These fuses are designed for : “General purpose use” protection (gG type) or motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by ...
Eaton’s Bussmann® series Red Spot centre tagged fuse ...
Description:
Eaton’s Bussmann® series Red Spot centre tagged fuse links (in sizes B1 to B4 and C1 to C3 and D1) are specifically designed for the protection of general industrial applications, e.g. power distribution, cable protection, motor protection. Good peak and ...